SN74LVC841A - 10-BIT BUS-INTERFACE D-TYPE LATCH

Texas Instruments

📥 Download Datasheet

SN74LVC841A Datasheet Preview — Preview of SN74LVC841A PDF

Datasheet Details

Part number	SN74LVC841A
Manufacturer	Texas Instruments
File Size	903.55 KB
Description	10-BIT BUS-INTERFACE D-TYPE LATCH
Datasheet	SN74LVC841A-etcTI.pdf

SN74LVC841A Product details

Description

ORDERING INFORMATION This 10-bit bus-interface D-type latch is designed for 1.65-V to 3.6-V VCC operation.The SN74LVC841A is designed specifically for driving highly capacitive or relatively low-impedance loads.It is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.The ten latches are transparent D-type latches.The device has noninverting data (D) inputs and provides true data at its outputs.A buffered output-enable (OE) in

Features

Operates From 1.65 V to 3.6 V.
Inputs Accept Voltages to 5.5 V.
Max tpd of 6.7 ns at 3.3 V.
Typical VOLP (Output Ground Bounce) 2 V at VCC = 3.3 V, TA = 25°C.
Ioff Supports Partial-Power-Down Mode Operation.
Supports Mixed-Mode Signal Operation on All Ports (5-V Input/Output Voltage With 3.3-V VCC).
Latch-Up Performance Exceeds 250 mA Per JESD 17.

📁 SN74LVC841A Similar Datasheet

SN74LVC1G125 - high performance non-inverting buffer (UMW)
SN74LVC1G34 - Single buffer (UMW)
SN74L71 - AND-Gate R-S Master-Slave F-F (National Semiconductor)
SN74L74N - Dual D-Type Flip-Flop (ETC)
SN74LS00 - QUAD 2-INPUT NAND GATE (Motorola)
SN74LS02 - QUAD 2-INPUT NOR GATE (Motorola)
SN74LS04 - Hex Inverter (ON Semiconductor)
SN74LS04D - Hex Inverter (ON Semiconductor)

Other Datasheets by Texas Instruments

SN74LVC821A - 10-BIT BUS-INTERFACE FLIP-FLOP
SN74LVC823A - 10-BIT BUS-INTERFACE FLIP-FLOP
SN74LVC827A - 10-Bit Buffer/Driver
SN74LVC828A - 10-Bit Buffer/Driver
SN74LVC861A - 10-Bit Bus Transceiver
SN74LVC863A - 9-BIT BUS TRANSCEIVER

Published: Dec 16, 2021 |