Datasheet4U Logo Datasheet4U.com

74LV245ATPW - Octal bus transceiver

This page provides the datasheet information for the 74LV245ATPW, a member of the 74LV245AT Octal bus transceiver family.

Description

The 74LV245AT is an 8-bit transceiver with 3-state outputs.

Features

  • Direct interface with TTL levels.
  • Supply voltage range from 4.5 V to 5.5 V.
  • Typical tpd of 3.1 ns at 5 V.
  • Typical VOL(p) < 0.8 V at VCC = 5 V, Tamb = 25 C.
  • Typical VOH(v) > 2.3 V at VCC = 5 V, Tamb = 25 C.
  • Supports mixed-mode voltage operation on all ports.
  • IOFF circuitry provides partial Power-down mode operation.
  • Latch-up performance exceeds 250 mA per JESD 78 Class II.
  • ESD protection:.
  • HBM ANSI/ESDA/JEDEC JS-001 Class 2 exceeds 3 kV.
  • M.

📥 Download Datasheet

Datasheet preview – 74LV245ATPW

Datasheet Details

Part number 74LV245ATPW
Manufacturer nexperia
File Size 707.49 KB
Description Octal bus transceiver
Datasheet download datasheet 74LV245ATPW Datasheet
Additional preview pages of the 74LV245ATPW datasheet.

📁 Similar Datasheet

  • 74LV245 - Octal bus transceiver (Philips)
  • 74LV240 - Octal buffer/line driver (Philips)
  • 74LV241 - Octal buffer/line driver (Philips)
  • 74LV244 - Octal buffer/line driver (NXP)
  • 74LV244A - Octal Buffers/Drivers (Texas Instruments)
  • 74LV244AT - Octal Buffers/Drivers (Texas Instruments)
  • 74LV20 - Dual 4-input NAND gate (Philips)
  • 74LV251 - 8-input multiplexer (Philips)
  • 74LV257 - Quad 2-input multiplexer (Philips)
  • 74LV259 - 8-bit addressable latch (Philips)
Other Datasheets by nexperia

Full PDF Text Transcription

Click to expand full text
74LV245AT Octal bus transceiver; 3-state Rev. 2 — 4 November 2016 Product data sheet 1. General description The 74LV245AT is an 8-bit transceiver with 3-state outputs. The device features an output enable (OE) and send/receive (DIR) for direction control. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. The 74LV245AT is designed to operate over a VCC range from 4.5 V to 5.5 V. The inputs are TTL compatible, which allows the device to be used to translate from 3.3 V to 5 V. Schmitt-trigger action at all inputs makes the circuit tolerant of slower input rise and fall times. This device is fully specified for partial Power-down applications using IOFF.
Published: |