TPT1044V Datasheet | 3PEAK

Features Ÿ Meet the ISO 11898-2:2016 and SAE J2284-1 to SAE J2284-5 Physical Layer Standards Ÿ Support CAN FD and Data Rates up to 5 Mbps Ÿ Short propagation delay times and fast loop times Ÿ 5 V power supply, I/O voltage range supports 2.8V to 5.5V MCU interface Ÿ Very low current standby mode with bus wake-up capability Ÿ Ideal passive behavior to CAN bus when unpowered Ÿ mon-Mode Input Voltage: ±30 V Ÿ Protection feature ： - Bus Fault protection: ±42V - VCC and VIO(V variants only) undervoltage protection - TXD dominant time-out function and Bus- dominant time-out function - Thermal shutdown protection Ÿ Available in SOP8 package and leadless DFN3X3 package Ÿ Qualified for Automotive Applications with AECQ100 Reliability Test Applications Ÿ All Devices Supporting Highly Loaded CAN Networks Ÿ Automotive and Transportation - Body Electronics / Lighting - Power Train / Chassis - Infotainment / Cluster - ADAS / Safety Description The TPT1044V is a CAN transceiver that meets the ISO11898 high-speed CAN (Controller Area Network) physical layer standard. The device is designed in CAN FD networks up to 5 Mbps and enhances timing margin and higher data rates in long and highly loaded networks. As the design, the device features cross-wire, overvoltage and loss of ground protection from - 42 V to +42 V, overtemperature shutdown, and a - 30 V to +30 V mon-mode input Voltage range. The TPT1044V has a secondary power supply input for I/O level shifting the input pin thresholds and RXD output level. This family has low current standby mode with CAN BUS waked up capability. Additionally, all devices include many protection features to enhance the device and network robustness. The TPT1044V are available in SOP-8 and DFN3X38L packages and is characterized from - 40°C to +125°C. Functional Block Diagram .3peakic..cn 1 / 18 Rev.A.0 High-speed CAN FD Transceiver with Standby Mode Table of Contents Features...