AM6T-N Datasheet | AIMTEC

DESCRIPTION Our AM6T-N series is a family of cost effective 6W single and dual output DC/DC converters. These converters bine a shielded metal package in a 24-pin DIP patible case and includes high performance features such as a 1500VDC input/output isolation voltage, continuous short circuit protection and a tight line / load regulation. Wide range devices operate over a 2:1 input voltage range continuously providing a stable output voltage. 27 models operate from input voltages of 12, 24 and 48VDC with output voltages of 3.3, 5, 12, 15, 24, ±5, ±12, ±15 & ±24VDC. High performance features include high efficiency operation up to 86% and output voltage accuracy of ±1%. All models are packaged in a low profile 31.75 x 20.32 x 10.16mm case. Operation is specified over the full operating temperature range of -40°C to +71°C with no derating required. Cooling is by free-air convection. ELECTRICAL SPECIFICATIONS All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. Input Specifications: Voltage range 12VDC, 9~18VDC 24VDC, 18~36VDC 48VDC, 36~72VDC p (Pi) Network General Specifications: Efficiency Switching frequency Output Specifications: Voltage accuracy (Single) Voltage accuracy (Dual) Ripple Noise (at 20MHz BW) Short circuit protection Line voltage regulation Load voltage regulation Temperature coefficient Physical Specifications: Dimensions Weight Case material 76% to 86% 300KHz, typ., 100% load Filter Isolation Specifications: Rated voltage (60 sec) Resistance Capacitance ±1%, typ. ±1% p. & ±3% n., typ. 1500VDC > 1000MOhm 120p F, typ. Environmental Specifications: Operating temperature (ambient) -40°C ... +71°C Storage temperature -55°C ... +125°C Case Temperature +100°C, max. Derating None required Humidity (non-condensing) Up to 95% Cooling Free-air Convection 30m Vp-p, typ. 100m Vp-p, typ. Continuous ±0.2%, max. ±0.5%, max. ±0.02%/°C, typ. 31.75x20.32x10.16mm 1.25x0.80x0.40inches 19g Metal MTBF: >...