AT7910E Datasheet | Atmel

Features .. - Space Wire Router - - - - - - - - - - - - - Logical to Physical addressing translation - Priority Management - Header Deletion Capability Eight Bidirectional Space Wire links - Full duplex munication - Data rate from 2 up to 200 Mbit/s in each direction Two External Interfaces - Dedicated Input and Output FIFOs - 9-bit wide Interface Configuration Port - Read/Write Accesses to internal registers - Accessible from both the spacewire links (8 channels) and the external interfaces - Remote Memory Access Protocol (RMAP) support Time Code Interface - Master/Slave Capability Error/Status Interface Operating range - Voltages - 3V to 3.6V - Temperature - - 55°C to +125°C Maximum Power consumption - All spacewire links active at 200Mbit/s : 4W -TBC Radiation Performance - Total dose tested successfully up to 300 Krad (Si) - No single event latchup below a LET of 80 Me V/mg/cm2 ESD better than 2000V Quality Grades - QML-Q or V with SMD Package: 196pins MQFPF Mass: 12grams Sp W-10X Space Wire Router AT7910E 7796B- AERO- 08/08 1. Description .. The Sp W-10X Space Wire routing switch is capable of connecting many nodes, providing a means of routing packets between the nodes connected to it. It prises eight Space Wire link interfaces and a routing matrix. The routing matrix enables packets arriving at one link interface to be transferred to and sent out of another link interface on the routing switch. The AT7910E was designed by Austrian Aerospace (Austria) and the University of Dundee (Scotland). It is manufactured using the SEU hardened cell library from Atmel MH1RT CMOS 0.35µm radiation hardened sea of gates technology. For any technical question relative to the functionality of the AT7910E please contact Atmel technical support at assp-applab.hotline@nto.atmel.. This document must be read in conjunction with the University of Dundee “Space Wire Router Sp W-10X User Manual” available at .atmel.. The Space Wire router prises the following functional logic blocks: -...