AT91SAM9XE128 Datasheet | Atmel

.. Features - Incorporates the ARM926EJ-S™ ARM® Thumb® Processor - DSP instruction Extensions, ARM Jazelle® Technology for Java® Acceleration - 8 Kbyte Data Cache, 16 Kbyte Instruction Cache, Write Buffer - 200 MIPS at 180 MHz - Memory Management Unit - Embedded ICE™, Debug munication Channel Support Additional Embedded Memories - One 32 Kbyte Internal ROM, Single-cycle Access at Maximum Matrix Speed - One 32 Kbyte (for AT91SAM9XE256 and AT91SAM9XE512) or 16 Kbyte (for AT91SAM9XE128) Internal SRAM, Single-cycle Access at Maximum Matrix Speed - 128, 256 or 512 Kbytes of Internal High-speed Flash for AT91SAM9XE128, AT91SAM9XE256 or AT91SAM9XE512 Respectively. Organized in 256, 512 or 1024 Pages of 512 Bytes Respectively. - 128-bit Wide Access - Fast Read Time: 60 ns - Page Programming Time: 4 ms, Including Page Auto-erase, Full Erase Time: 10 ms - 10,000 Write Cycles, 10 Years Data Retention, Page Lock Capabilities, Flash Security Bit Enhanced Embedded Flash Controller (EEFC) - Interface of the Flash Block with the 32-bit Internal Bus - Increases Performance in ARM and Thumb Mode with 128-bit Wide Memory Interface External Bus Interface (EBI) - Supports SDRAM, Static Memory, ECC-enabled NAND Flash and pact Flash™ USB 2.0 Full Speed (12 Mbits per second) Device Port - On-chip Transceiver, 2,688-byte Configurable Integrated DPRAM USB 2.0 Full Speed (12 Mbits per second) Host Single Port in the 208-pin PQFP Device and Double Port in 217-ball LFBGA Device - Single or Dual On-chip Transceivers - Integrated FIFOs and Dedicated DMA Channels Ethernet MAC 10/100 Base-T - Media Independent Interface or Reduced Media Independent Interface - 28-byte FIFOs and Dedicated DMA Channels for Receive and Transmit Image Sensor Interface - ITU-R BT. 601/656 External Interface, Programmable Frame Capture Rate - 12-bit Data Interface for Support of High Sensibility Sensors - SAV and EAV Synchronization, Preview Path with Scaler, YCb Cr Format Bus Matrix - Six...