S6500P Datasheet | Kodenshi AUK Group

Semiconductor POWER FACTOR CORRECTION Description This device is power factor correction controller using a discontinues conduction mode of boost converter. Especially, it is optimized for electronic ballasts which prevent abnormal functions in load runaway and feedback loop fault conditions and low power and high density power supplies which require minimum board size. The external ponent R/C filter is not necessary because the R/C filter is included in current sense block. This is the improved version with a pin out equivalent to world standard. Features - - - - - - - - - Dynamic, Static & Feedback OVP Extremely Low Start up Current (30u A Typ.) Very Low Operating Current (4m A Typ.) Internal Self Start Timer Current Sense with Internal RC Filter Trimmed ±1.5% internal Reference Under Voltage Lock Out with Hysteresis Pin patible to World Standard High Current Totem Pole Gate Drive Applications - Electronic Ballast - SMPS Ordering Information Type NO. S6500P Marking S6500P Package Code DIP-8 Outline Dimensions PIN Collection unit : mm KSI-L013-001 Internal Block Diagram 2. 5V Ref Under Voltage Lock Out Vcc + Error Amplifier INV 0.4 V 1 - Feedback OVP 40u A Ref uvlo + 18V + Vref + 2.3...