AMMC-6222 Datasheet | Avago Technologies

Description Avago Technologies AMMC-6222 is an easy-to-use broadband, high gain, high linearity Low Noise Amplifier that operates from 7 GHz to 21GHz. The wide band and unconditionally stable performance makes this MMIC ideal as a primary or sub-sequential low noise block or a transmitter or LO driver. The MMIC has 3 gain stages and requires a 4V, 120m A power supply for optimal performance. It has a selectable pin to switch between low and high current, corresponding with low and high output power and linearity. DC-block capacitors are integrated at the input and output stages. Since this MMIC covers several bands, it can reduce part inventory and increase volume purchase options The MMIC is fabricated using PHEMT technology to provide exceptional low noise, gain and power performance. The backside of the chip is both RF and DC ground which helps simplify the assembly process and reduce assembly related performance variations and cost. Features - 2000μm x 800μm Die Size - Single Positive Bias Supply - Selectable Output Power / Linearity - No Negative Gate Bias Specifications (Vdd = 4.0V, Idd = 120m A) - RF Frequencies: 7 - 21 GHz - High Output IP3: 29d Bm - High Small-Signal Gain: 25d B - Typical Noise Figure: 2.4d B - Input, Output Match: -10d B Applications - Microwave Radio systems - Satellite VSAT, DBS Up/Down Link - LMDS & Pt-Pt mm W Long Haul - Broadband Wireless Access (including 802.16 and 802.20 Wi Max) - WLL and MMDS loops - mercial grade military Note: 1. This MMIC uses depletion mode p HEMT devices. Chip Size: 800 μm x 2000μm (31.5 x 78.74 mils) Chip Size Tolerance: ±10 μm (±0.4 mils) Chip Thickness: 100 ± 10 μm (4 ±0.4 mils) Pad Dimensions: 100 x 100 μm (4 x 4 mils) Attention: Observe precautions for handling electrostatic sensitive devices. ESD Machine Model (60V) ESD Human Body Model (150V) Refer to Avago Application Note A004R: Electrostatic Discharge Damage and Control Absolute Maximum Ratings (1) Parameters/Condition Drain to Ground...