Datasheet4U Logo Datasheet4U.com

MGA-685T6 - Low Noise Amplifier

General Description

The MGA-685T6 is an easy to

use GaAs MMIC amplifier that offer excellent linearity and low noise figure for application from 0.1 to 1.5 GHz.

The device is housed in Ultra Thin Small Leadless Package (UTSLP) with 0.4mm package thickness.

Key Features

  • Single +3V supply.
  • High Linearity.
  • Low Noise figure.
  • Miniature Surface Mount 2.0x1.3x0.4 mm3 6-lead UTSLP Specifications at 500 MHz; 3V 10 mA (Typ. ).
  • 0.93 dB Noise Figure.
  • 18.7 dBm OIP3.
  • 18.9 dB Gain.
  • 17.3 dBm P1dB.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MGA-61563 Low Noise Amplifier Agilent Technologies
MGA-62563 Current-Adjustable / Low Noise Amplifier Agilent
MGA-64135 2 - 6 GHz Cascadable GaAs MMIC Amplifier Agilent(Hewlett-Packard)
MGA-665P8 GaAs Enhancement-Mode PHEMT 0.5 - 6 GHz Low Noise Amplifier Agilent
MGA-13116 Very Low Noise Amplifier Avago Technologies

Other Datasheets by Avago Technologies (now Broadcom)

Part Number Description
MGA-68563 Low Noise Amplifier
MGA-683P8 Low Noise And High Linearity Active Bias Low Noise Amplifier
MGA-684P8 Low Noise Active Bias Low Noise Amplifier
MGA-61563 Low Noise Amplifier
MGA-62563 Low Noise Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MGA-685T6 Current-Adjustable, Low Noise Amplifier Data Sheet Description The MGA-685T6 is an easy–to–use GaAs MMIC amplifier that offer excellent linearity and low noise figure for application from 0.1 to 1.5 GHz. The device is housed in Ultra Thin Small Leadless Package (UTSLP) with 0.4mm package thickness. One external resistor is used to set the bias current from 5 mA to 30 mA. This allows the designer to use the same part in several circuit positions and tailor the linearity performance (and current consumption) to suit each position. The output of the amplifier is matched to 50Ω (below 2:1 VSWR) across the entire bandwidth and only requires minimum input matching. The amplifier allows a wide dynamic range by offering a 0.93 dB NF coupled with a +18.7 dBm Output IP3.