Datasheet4U Logo Datasheet4U.com

A1185 - Unipolar Hall-Effect Switches

Key Features

  • Chopper stabilization Low switchpoint drift over operating temperature range Low stress sensitivity Field-programmable for optimized switchpoints On-chip protection Supply transient protection Reverse-battery protection On-board voltage regulator 3.5 V to 24 V operation A1185-DS, Rev. 1 Allegro MicroSystems, Inc. 115 Northeast Cutoff, Box 15036 Worcester, Massachusetts 01615-0036 (508) 853-5000 www. allegromicro. com A1185 and A1186 Ultrasensitive Two-Wire Field-Programmable Chopper-Stabiliz.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
A1182 2SA1182 Toshiba
A11820 RES NTWK THICK FILM
A11820 RES NTWK / THICK FILM Fenghua Advanced Technology
A1184 Unipolar Hall-Effect Switches Allegro
A1102P Dolby-B Type Noise Reduction System Sony

Other Datasheets by Allegro MicroSystems

Part Number Description
A1180 Unipolar Hall-Effect Switch
A1181 Unipolar Hall-Effect Switch
A1182 Unipolar Hall-Effect Switch
A1183 Unipolar Hall-Effect Switch
A1186 Unipolar Hall-Effect Switches

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
A1185 and A1186 Ultrasensitive Two-Wire Field-Programmable Chopper-Stabilized Unipolar Hall-Effect Switches The A1185 and A1186 are ultrasensitive, two-wire, unipolar Hall effect switches. The operate point, BOP, can be field-programmed, after final packaging of the sensor and placement into the application. This advanced feature allows the optimization of the sensor switching performance, by effectively accounting for variations caused by mounting tolerances for the device and the target magnet.