ADATE209 Datasheet | Analog Devices

Features >4.0 Gbps (2 V swings) 120 ps rise time/fall time (2 V swings) <1.0 W for dual driver (<500 m W/channel) - 1 V to +3.5 V range Fast termination mode (VTx) Cable loss pensation FUNCTIONAL BLOCK DIAGRAM VH1 VL1 VT1 DA1 DB1 TERM1 CLC1EN VH2 DROUT1 APPLICATIONS Automatic test equipment Semiconductor test systems Board test systems Instrumentation and characterization equipment High speed memory testing (DDR2/DDR3/DDR4) HDMI testing DA2 DB2 TERM2 VL2 VT2 DROUT2 07277-001 CLC2EN Figure 1. GENERAL DESCRIPTION The ADATE209 is a dual pin driver designed for testing DDR2, DDR3, and DDR4. It can also be used for high speed So C applications, such as testing PCI Express 1.0 and HDMI™. The device is a three-level driver capable of high fidelity swings from 200 m V to 4 V over a - 1 V to +3.5 V range. It has rise/fall times (20% to 80%) under 120 ps for a 2 V programmed swing and 150 ps for a 3 V programmed swing, and is capable of supporting data rates of 4.4 Gbps and 3.2 Gbps, respectively. The device is capable of high speed transitions into and out of termination mode. It also contains peaking/pre-emphasis circuitry. The ADATE209 is available in an 8 mm × 8 mm, 49-ball CSP_BGA. Rev. 0 Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 .analog. Fax: 781.461.3113 ©2008 Analog Devices, Inc. All rights reserved. ADATE209 TABLE OF CONTENTS Features .............................................................................................. 1  Applications...