ADIS16265 Datasheet | Analog Devices

Data Sheet Programmable Digital Gyroscope Sensor ADIS16260/ADIS16265 Features GENERAL DESCRIPTION Yaw rate gyroscope with range scaling The ADIS16260 and the ADIS16265 are programmable digital ±80°/sec, ±160°/sec, and ±320°/sec settings gyroscopes that bine industry-leading MEMS and signal No external configuration required to start data collection processing technology in a single pact package. They provide Start-up time: 165 ms accuracy performance that would require full motion calibration Sleep mode recovery time: 2.5 ms Factory-calibrated sensitivity and bias ADIS16265 calibration temperature range: - 40°C to +85°C ADIS16260 calibration temperature: +25°C SPI-patible serial interface Relative angle displacement output Embedded temperature sensor Programmable operation and control Automatic and manual bias correction controls Sensor bandwidth selection: 50 Hz/330 Hz Sample rate: 256 SPS/2048 SPS settings Bartlett window FIR filter length, number of taps Digital I/O: data ready, alarm indicator, general-purpose Alarms for condition monitoring Sleep mode for power management DAC output voltage Single-mand self-test Single-supply operation: 4.75 V to 5.25 V 3.3 V patible digital lines with any other MEMS gyroscope in their class. When power is applied, the ADIS16260 and the ADIS16265 automatically start up and begin sampling sensor data, without requiring configuration mands from a system processor. An addressable register structure and a mon serial peripheral interface (SPI) provide simple access to sensor data and configuration settings. Many digital processor platforms support the SPI with simple firmwarelevel instructions. The ADIS16260 and the ADIS16265 provide several programmable Features for in-system optimization. The sensor bandwidth switch (50 Hz and 330 Hz), Bartlett window FIR filter length, and sample rate settings provide users with controls that enable noise vs. bandwidth optimization. The digital input/output...