ADIS16266 Datasheet | Analog Devices

Data Sheet Features ±14,000°/sec Digital Gyroscope Sensor ADIS16266 GENERAL DESCRIPTION The ADIS16266 is a programmable digital gyroscope that bines industry-leading MEMS and signal processing technology in a single pact package. It provides accuracy performance that requires full motion calibration with any other MEMS gyroscope in this class. When power is applied, the ADIS16266 automatically starts up and begins sampling sensor data, without requiring configuration mands from a system processor. An addressable register structure and a mon serial peripheral interface (SPI) provide simple access to sensor data and configuration settings. Many digital processor platforms support the SPI with simple firmware level instructions. The ADIS16266 provides several programmable Features for in-system optimization. The Bartlett window FIR filter length and sample rate settings provide users with controls that enable noise vs. bandwidth optimization. The digital input/output lines offer options for a data ready signal that helps the master processor efficiently manage data coherency, an alarm indicator signal for triggering master processor interrupts, and a general-purpose function for setting and monitoring system level digital controls/ conditions. The ADIS16266 is pin-patible with the ADIS1625x and ADIS1626x families and es in an LGA package (11.2 mm × 11.2 mm × 5.5 mm) that meets Pb-free solder reflow profile requirements, per JEDEC J-STD-020. It offers an extended operating temperature range of - 40°C to +105°C. Yaw rate gyroscope with range scaling ±3500°/sec, ±7000°/sec, and ±14,000°/sec settings 2429 SPS sample rate Wide sensor bandwidth: 360 Hz No external configuration required to start data collection Start-up time: 170 ms Sleep mode recovery time: 2.5 ms Factory-calibrated sensitivity and bias Calibration temperature range: - 40°C to +70°C SPI-patible serial interface Relative angle displacement output Embedded temperature sensor...