Datasheet4U Logo Datasheet4U.com

HMC902LP3E - GaAs pHEMT MMIC

General Description

The HMC902LP3E is a GaAs MMIC Low Noise Amplifier housed in a leadless 3x3 mm plastic surface mount package.

The amplifier operates between 5 and 10 GHz, providing 19 dB of small signal gain, 1.8 dB noise figure, and output IP3 of +28 dBm, while requiring only 80 mA from a +3.5V supply.

Key Features

  • Low Noise Figure: 1.8 dB High Gain: 19 dB High P1dB Output Power: 16 dBm Single Supply: +3.5 V @ 80 mA Output IP3: +28 dBm 50 Ohm matched Input/Output 16 Lead 3x3mm SMT Package: 9mm² General.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HMC902 GaAs pHEMT MMIC LOW NOISE AMPLIFIER Hittite Microwave
HMC903 GaAs pHEMT MMIC LOW NOISE AMPLIFIER Hittite Microwave
HMC907 1/2 Watt Power Amplifier Hittite Microwave Corporation
HMC911LC4B BROADBAND ANALOG TIME DELAY Hittite Microwave Corporation
HMC941 0.5dB LSB GaAs MMIC 5-BIT DIGITAL ATTENUATOR Hittite Microwave Corporation

Other Datasheets by Analog Devices

Part Number Description
HMC902 Low Noise Amplifier
HMC900LP5E 50 MHz DUAL PROGRAMMABLE LOW PASS FILTER
HMC903LP3E Low Noise Amplifier
HMC904LC5 GaAs MMIC I/Q DOWNCONVERTER
HMC905LP3E 6 GHz LOW NOISE PROGRAMMABLE DIVIDER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Amplifiers - Low Noise - SMT v01.0310 7 Typical Applications This HMC902LP3E is ideal for: • Point-to-Point Radios • Point-to-Multi-Point Radios • Military & Space • Test Instrumentation Functional Diagram HMC902LP3E GaAs pHEMT MMIC LOW NOISE AMPLIFIER, 5 - 10 GHz Features Low Noise Figure: 1.8 dB High Gain: 19 dB High P1dB Output Power: 16 dBm Single Supply: +3.5 V @ 80 mA Output IP3: +28 dBm 50 Ohm matched Input/Output 16 Lead 3x3mm SMT Package: 9mm² General Description The HMC902LP3E is a GaAs MMIC Low Noise Amplifier housed in a leadless 3x3 mm plastic surface mount package. The amplifier operates between 5 and 10 GHz, providing 19 dB of small signal gain, 1.8 dB noise figure, and output IP3 of +28 dBm, while requiring only 80 mA from a +3.5V supply.