AT8958252 Datasheet | Atmel

Features - patible with MCS-51™ Products - 8K Bytes of In-System Reprogrammable Downloadable Flash Memory - - - - - - - - - - - - - - - - SPI Serial Interface for Program Downloading - Endurance: 1,000 Write/Erase Cycles 2K Bytes EEPROM - Endurance: 100,000 Write/Erase Cycles 4V to 6V Operating Range Fully Static Operation: 0 Hz to 24 MHz Three-level Program Memory Lock 256 x 8-bit Internal RAM 32 Programmable I/O Lines Three 16-bit Timer/Counters Nine Interrupt Sources Programmable UART Serial Channel SPI Serial Interface Low-power Idle and Power-down Modes Interrupt Recovery From Power-down Programmable Watchdog Timer Dual Data Pointer Power-off Flag 8-bit Microcontroller with 8K Bytes Flash AT89S8252 Description The AT89S8252 is a low-power, high-performance CMOS 8-bit microputer with 8K bytes of downloadable Flash programmable and erasable read only memory and 2K bytes of EEPROM. The device is manufactured using Atmel’s high-density nonvolatile memory technology and is patible with the industry-standard 80C51 instruction set and pinout. The on-chip downloadable Flash allows the program memory to be reprogrammed in-system through an SPI serial interface or by a conventional nonvolatile memory programmer. By bining a versatile 8-bit CPU with downloadable Flash on a monolithic chip, the Atmel AT89S8252 is a powerful microputer which provides a highly-flexible and cost-effective solution to many embedded control applications. The AT89S8252 provides the following standard features : 8K bytes of downloadable Flash, 2K bytes of EEPROM, 256 bytes of RAM, 32 I/O lines, programmable watchdog timer, two data pointers, three 16-bit timer/counters, a six-vector two-level interrupt architecture, a full duplex serial port, on-chip oscillator, and clock circuitry. In addition, the AT89S8252 is designed with static logic for operation down to zero frequency and supports two software selectable power saving modes. The Idle Mode stops the CPU while allowing the RAM,...