CY7C1379C Datasheet | Cypress

Features - Can support up to 133-MHz bus operations with zero wait states - Data is transferred on every clock - Pin patible and functionally equivalent to ZBT™ devices - Internally self-timed output buffer control to eliminate the need to use OE - Registered inputs for flow-through operation - Byte Write capability - 256K x 32 mon I/O architecture - Single 3.3V power supply (VDD) - Fast clock-to-output times - 6.5 ns (for 133-MHz device) - Clock Enable (CEN) pin to suspend operation - Synchronous self-timed writes - Asynchronous Output Enable - Available in JEDEC-standard lead-free 100-Pin TQFP, lead-free and non lead-free 165-Ball FBGA package - Burst Capability- linear or interleaved burst order - Low standby power Functional Description [1] The CY7C1379C is a 3.3V, 256K x 32 Synchronous Flow-through Burst SRAM designed specifically to support unlimited true back-to-back Read/Write operations without the insertion of wait states. The CY7C1379C is equipped with the advanced No Bus Latency™ (No BL™) logic required to enable consecutive Read/Write operations with data being transferred on every clock cycle. This feature dramatically improves the throughput of data through the SRAM, especially in systems that require frequent Write-Read transitions. All synchronous inputs pass through input registers controlled by the rising edge of the clock. The clock input is qualified by the Clock Enable (CEN) signal, which when deasserted suspends operation and extends the previous clock cycle. Maximum access delay from the clock rise is 6.5 ns (133-MHz device). Write operations are controlled by the two Byte Write Select (BW[A:D]) and a Write Enable (WE) input. All writes are conducted with on-chip synchronous self-timed write circuitry. Three synchronous Chip Enables (CE1, CE2, CE3) and an asynchronous Output Enable (OE) provide for easy bank selection and output tri-state control. In order to avoid bus contention, the output drivers are synchronously tri-stated during the data...