CY7C4285 Datasheet | Cypress

CY7C4275 CY7C4285 32K/64Kx18 Deep Sync FIFOs Features - High-speed, low-power, first-in first-out (FIFO) memories - 32K x 18 (CY7C4275) - 64K x 18 (CY7C4285) - 0.5 micron CMOS for optimum speed/power - High-speed 100-MHz operation (10-ns read/write cycle times) - Low power - ICC=50 m A - - - - - - - - - - - - - - ISB = 2 m A Fully asynchronous and simultaneous read and write operation Empty, Full, Half Full, and programmable Almost Empty and Almost Full status flags TTL patible Retransmit function Output Enable (OE) pin Independent read and write enable pins Center power and ground pins for reduced noise Supports free-running 50% duty cycle clock inputs Width Expansion Capability Depth Expansion Capability 68-pin PLCC and 64-pin 10x10 TQFP Pin-patible density upgrade to CY7C42X5 families Pin-patible density upgrade to IDT72205/15/25/35/45 Functional Description The CY7C4275/85 are high-speed, low-power, first-in first-out (FIFO) memories with clocked read and write interfaces. All are 18 bits wide and are pin/functionally patible to the CY7C42X5 Synchronous FIFO family. The CY7C4275/85 can be cascaded to increase FIFO depth. Programmable Features include Almost Full/Almost Empty flags. These FIFOs provide solutions for a wide variety of data buffering needs, including high-speed data acquisition, multiprocessor interfaces, and munications buffering. These FIFOs have 18-bit input and output ports that are controlled by separate clock and enable signals. The input port is controlled by a free-running clock (WCLK) and a write enable pin (WEN). When WEN is asserted, data is written into the FIFO on the rising edge of the WCLK signal. While WEN is held active, data is continually written into the FIFO on each cycle. The output port is controlled in a similar manner by a free-running read clock (RCLK) and a read enable pin (REN). In addition, the CY7C4275/85 have an output enable pin (OE). The read and write clocks may be tied together for...