CYV15G0203TB Datasheet | Cypress

Independent Clock Dual HOTLink II™ Serializer Independent Clock Dual HOTLink II™ Serializer Features Functional Description - Second-generation HOTLink® technology - pliant to SMPTE 292M and SMPTE 259M video standards - Dual-channel video serializer - 195- to 1500-Mbps serial data signaling rate - Simultaneous operation at different signaling rates - Supports half-rate and full-rate clocking - Internal phase-locked loops (PLLs) with no external PLL ponents - Redundant differential PECL-patible serial outputs per channel - No external bias resistors required - Signaling-rate controlled edge-rates - Internal source termination - Synchronous LVTTL parallel interface - JTAG boundary scan - Built-In Self-Test (BIST) for at-speed link testing - Low-power 1.4 W @ 3.3 V typical - Single 3.3 V supply - Thermally enhanced BGA - Pb-free package option available - 0.25 Bi CMOS technology The CYV15G0203TB Independent Clock Dual HOTLink II™ Serializer is a point-to-point or point-to-multipoint munications building block enabling transfer of data over a variety of high-speed serial links including SMPTE 292M and SMPTE 259M video applications. It supports signaling rates in the range of 195 to 1500 Mbps per serial link. The two channels are independent and can simultaneously operate at different rates. Each channel accepts 10-bit parallel characters in an Input Register and converts them to serial data. Figure 1 illustrates typical connections between independent video co-processors and corresponding CYV15G0203TB Serializer and CYV15G0204RB Reclocking Deserializer chips. The CYV15G0203TB satisfies the SMPTE-259M and SMPTE-292M pliance as per SMPTE EG34-1999 Pathological Test Requirements. As a second-generation HOTLink device, the CYV15G0203TB extends the HOTLink family with enhanced levels of integration and faster data rates, while maintaining serial-link patibility (data, and BIST) with other HOTLink devices. Each channel of the CYV15G0203TB...