CYV15G0204RB Datasheet | Cypress

Independent Clock Dual HOTLink II™ Reclocking Deserializer Features - Second-generation HOTLink® technology - pliant to SMPTE 292M and SMPTE 259M video standards - Dual-channel video reclocking deserializer - 195- to 1500-Mbps serial data signaling rate .. - Simultaneous operation at different signaling rates - Supports reception of either 1.485 or 1.485/1.001 Gbps data rate with the same training clock - Supports half-rate and full-rate clocking - Internal phase-locked loops (PLLs) with no external PLL ponents - Selectable differential PECL-patible serial inputs - - - - - Internal DC-restoration Synchronous LVTTL parallel interface JTAG boundary scan Built-In Self-Test (BIST) for at-speed link testing Link Quality Indicator - Analog signal detect - - - - - - Digital signal detect Low-power 2W @ 3.3V typical Single 3.3V supply Thermally enhanced BGA Pb-Free package option available 0.25μ Bi CMOS technology and SMPTE 259 video applications. It supports signaling rates in the range of 195 to 1500 Mbps per serial link. The two channels are independent and can simultaneously operate at different rates. Each receive channel accepts serial data and converts it to 10-bit parallel characters and presents these characters to an Output Register. The received serial data can also be reclocked and retransmitted through the reclocker serial outputs. Figure 1 illustrates typical connections between independent video co-processors and corresponding CYV15G0204RB Reclocking Deserializer and CYV15G0203TB Serializer chips. The CYV15G0204RB satisfies the SMPTE-259M and SMPTE-292M pliance as per SMPTE EG34-1999 Pathological Test Requirements. As a second-generation HOTLink device, the CYV15G0204RB extends the HOTLink family with enhanced levels of integration and faster data rates, while maintaining serial-link patibility (data and BIST) with other HOTLink devices. Each channel of the CYV15G0204RB Dual HOTLink II device accepts a serial...