Datasheet4U Logo Datasheet4U.com

74LVC374A - OCTAL D-TYPE FLIP-FLOP

General Description

The 74LVC374A provides eight edge-triggered D-type flip-flops featuring 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads.

Key Features

  • Supply Voltage Range from 1.65V to 3.6V.
  • Sinks or Sources 24ma at VCC = 3V.
  • CMOS Low Power Consumption.
  • IOFF Supports Partial Power Down Operation.
  • Inputs or Outputs Accept Up to 5.5V.
  • Inputs Can Be Driven by 3.3V or 5V Allowing for Mixed Voltage.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74LVC374A Octal D-type flip-flop NXP
74LVC374A Octal D-type flip-flop nexperia
74LVC374A OCTAL D-TYPE FLIP-FLOP STMicroelectronics
74LVC374A Low-Voltage CMOS Octal D-Type Flip-Flop ON Semiconductor
74LVC374A-Q100 Octal D-type flip-flop nexperia

Other Datasheets by Diodes Incorporated

Part Number Description
74LVC373A OCTAL TRANSPARENT D-TYPE LATCH
74LVC32A QUADRUPLE 2-INPUT OR GATES
74LVC3G04 TRIPLE INVERTER GATE
74LVC00A QUADRUPLE 2-INPUT NAND GATES
74LVC04A HEX BUFFERS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NEW PRODUCT 74LVC374A OCTAL D-TYPE FLIP-FLOP WITH 3 STATE OUTPUTS Description The 74LVC374A provides eight edge-triggered D-type flip-flops featuring 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. These devices are particularly suitable for implementing buffer registers, input/output (I/O) ports, bidirectional bus drivers, and working registers. On the positive transition of the clock (CLK) input, the Q outputs are set to the logic levels set up at the data (D) inputs. A buffered output-enable (OE) input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly.