Datasheet4U Logo Datasheet4U.com

AH1808 - HIGH SENSITIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH

General Description

The AH1808 is a high-sensitivity, micropower Omnipolar Hall Effect switch IC.

It is designed for portable and battery powered consumer equipment, home appliances and industrial equipment such as smartmeter magnetic-tamper detection.

Key Features

  • Omnipolar (North or South Pole) Operation.
  • High Sensitivity.
  • Single Open Drain Output.
  • Micropower Operation.
  • 2.5V to 5.5V Operating Range.
  • Chopper Stabilized Design Provides Superior Temperature Stability Minimal Switch Point Drift Enhanced Immunity to Stress.
  • Good RF Noise Immunity.
  • -40°C to +85°C Operating Temperature.
  • ESD (HBM) > 6KV.
  • Small Low Profile SOT553 and Industry Standard SC59, SIP-3 (Ammo Pack) and SIP-3 (Bulk Pack) Packages.
  • T.

📥 Download Datasheet

Full PDF Text Transcription for AH1808 (Reference)

Note: Below is a high-fidelity text extraction (approx. 800 characters) for AH1808. For precise diagrams, and layout, please refer to the original PDF.

AH1808 HIGH SENSITIVITY MICROPOWER OMNIPOLAR HALL-EFFECT SWITCH Description The AH1808 is a high-sensitivity, micropower Omnipolar Hall Effect switch IC. It is designed f...

View more extracted text
sitivity, micropower Omnipolar Hall Effect switch IC. It is designed for portable and battery powered consumer equipment, home appliances and industrial equipment such as smartmeter magnetic-tamper detection. Based on two sensitive Hall effect plates and a chopper stabilized architecture, the AH1808 provides a reliable solution over the whole operating range. To support portable and battery powered equipment, the design has been optimized to operate over the supply range of 2.5V to 5.5V and consumes only 24µW with a supply of 3V. The single open drain output can be switched on with either a North or South pole of sufficien