Datasheet4U Logo Datasheet4U.com

CH374 - USB bus interface

General Description

VCC GND V3 XI XO UD+ UD- D7~D0 RD# WR# CS# INT# A0 ACT# UEN CKO RSTI RST RST# SLP POWER POWER POWER IN OUT USB signal USB signal Bi-directional tri-state IN IN IN Open drain OUT IN Open drain OUT IN OUT IN OUT OUT OUT Positive power input port, requires an external 0.1uF power decoupling capacita

Key Features

  • Supports low-speed of 1.5Mbps and full-speed of 12Mbps, conforms to USB Specification Version 2.0, only needs crystal and capacitor as peripherals.
  • Supports USB host interface and USB device interface, and supports exchanging USB-HOST and USB-DEVICE mode dynamically.
  • CH374U has 3 ports of ROOT-HUB internal, and supports 3 USB devices.
  • Supports control transfer, bulk transfer, interrupt transfer and synchronous/isochronous transfer of USB device with common low-speed and f.

📥 Download Datasheet

Datasheet Details

Part number CH374
Manufacturer Unknown Manufacturer
File Size 204.91 KB
Description USB bus interface
Datasheet download datasheet CH374 Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
The DataSheet of CH374 (the first) 1 USB bus interface chip CH374 English DataSheet Version: 2 http://wch.cn http://wch-ic.com 1. Introduction CH374 is a USB bus universal interface chip, supports both USB-HOST and USB-DEVICE/SLAVE mode. There are three ports of HUB internal. It supports low-speed and full-speed control transfer, bulk transfer, interrupt transfer and synchronous/isochronous transfer. At local, there are 8-bit data bus and read, write, chip select control wire and interrupt output in CH374.It is convenient to link CH374 to controller system bus of DSP/MCU/MPU/microprocessors (uPs). Besides, CH374 supplies SPI serial communication mode to save pins. CH374 connects to MCU/DSP/MPU through 3-wire or 4-wire SPI serial interface and interrupt output.