EL1507C Datasheet | Elantec

- Product Brief - Product Brief Medium Power Differential Line Driver Features - Drives 360m A at 16VP-P on ±12V supplies - 40VP-P differential output drive into 100Ω - -75d Bc typical driver output distortion driving 50Ω at 1MHz and ½-IS bias current - Low quiescent current of 3.5m A per amplifier in ½-IS mode - Power down disable mode General Description The EL1507C is a very low power dual operational amplifier designed for central office and customer premise line driving for DMT ADSL solutions. This device Features a high drive capability of 400m A while consuming only 7.5m A of supply current per amplifier from ±12V supplies. This driver achieves a typical distortion of less than -75d Bc, at 1MHz into a 50Ω load. The EL1507C is available in the thermallyenhanced 16-pin SO package, as well as a 16-pin LPP package. Both are specified for operation over the full -40°C to +85°C temperature range. The EL1507C has two control pins, C0 and C1. With the selection of C0 and C1, the device can be set into full-IS power, ¾-IS power, ½-IS power, and power down disable modes. The EL1507C maintains excellent distortion and load driving capabilities even in the lowest power settings. Applications - ADSL G.DMT and G.lite CO line driving - G.SHDSL, HDSL2 line driver - ADSL CPE line driving - Video distribution amplifier - Video twisted-pair line driver Connection Diagram Ordering Information Part No EL1507CS EL1507CL Package 16-Pin SO 16-Pin LPP Tape & Reel Outline # MDP0027 MDP0046 NC 1 VOUTA 2 VIN-A 3 GND- 4 GND- 5 VIN+A 6 GND 7 VS- 8 Power Control Logic 16-Pin SO + + - 16 VS+ 16 OUTA 15 VOUTB 14 VIN-B 1 13 GND- INA- 2 12 GND- INA+ 3 11 VIN+B GND 4 10 C1 6 5 VS- 7 9 C0 C0 8 + Amp A + Amp B 11 INB10 INB+ 9 C1 12 13 OUTB 14 VS+ 16-Pin LPP Top View July 20, 2001 - These GND pins are heat spreaders Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this...