Datasheet4U Logo Datasheet4U.com

ST78C36 - ECP/EPP PARALLEL PRINTER PORT WITH 16-BYTE FIFO

General Description

The ST78C36/36A is a monolithic Parallel Port Interface for use with IBM PC compatible platforms.

Key Features

  • IBM AT bus compatible.
  • Bi-directional port capability.
  • 16 byte FIFO for ECP modes.
  • On-chip oscillator (ST78C36A, ST78C36CQ64).
  • Software selectable Interrupt (5, 7, or 9) and 8-bit DMA channel (ST78C36CQ64) FIGURE 1. ST78C36/36A BLOCK.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ST780C04L PHASE CONTROL THYRISTORS International Rectifier
ST780C06L PHASE CONTROL THYRISTORS International Rectifier
ST780CLPBF Phase Control Thyristors Vishay Siliconix
ST7810 3-terminal 1 A positive voltage regulator SEMTECH
ST7812 3-terminal 1 A positive voltage regulator SEMTECH

Other Datasheets by Exar (now MaxLinear)

Part Number Description
ST78C36A ECP/EPP PARALLEL PRINTER PORT WITH 16-BYTE FIFO
ST78C34 GENERAL PURPOSE PARALLEL PRINTER PORT WITH 83 BYTE FIFO

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com รกรง FEBRUARY 2004 ST78C36/36A ECP/EPP PARALLEL PRINTER PORT WITH 16-BYTE FIFO REV. 5.0.1 GENERAL DESCRIPTION The ST78C36/36A is a monolithic Parallel Port Interface for use with IBM PC compatible platforms. Operation as a standard Centronics printer port is the default, but software may re-configure the device to support bi-directional IBM PS/2 parallel port, Enhanced Parallel Port (EPP), or the Extended Capabilities Port (ECP , as defined by Hewlett Packard and Microsoft) modes. The ECP modes are supported by a 16 byte FIFO that may be accessed by programmed I/O or DMA cycles.