XRT73L02M Datasheet | Exar

DESCRIPTION The XRT73L02M is a two-channel fully integrated Line Interface Unit (LIU) for E3/DS3/STS-1 applications. It incorporates independent Receivers, Transmitters in a single 100 pin TQFP package. The XRT73L02M can be configured to operate in either E3 (34.368 MHz), DS3 (44.736 MHz) or STS-1 (51.84 MHz) modes.The transmitter can be turned off or tri-stated for redundancy support and for conserving power. The XRT73L02M’s differential receiver provides high noise interference margin and is able to receive the data over 1000 feet of cable or with up to 12 d B of cable attenuation. The XRT73L02M provides both Serial Microprocessor Interface as well as Hardware mode for programming and control. The XRT73L02M supports local,remote and digital loop-backs. The XRT73L02M also contains an onboard Pseudo Random Binary Sequence (PRBS) generator and detector with the ability to insert and detect single bit error. - Provides low jitter clock outputs for either DS3,E3 or STS-1 rates. - On-chip clock synthesizer provides the appropriate rate clock from a single 12.288 MHz Clock. - Provides low jitter output clock. TRANSMITTER: - pliant with Bellcore GR-499, GR-253 and ANSI T1.102 Specification for transmit pulse - Tri-state Transmit output capability for redundancy applications - Transmitter can be turned on or off. CONTROL AND DIAGNOSTICS: - 5 wire Serial Microprocessor Interface for control and configuration. - Supports optional internal Transmit Driver Monitoring. - PRBS error counter register to accumulate errors. - Hardware Mode for control and configuration. - Supports Local, Remote and Digital Loop-backs. - Single 3.3 V ± 5% power supply. - 5 V Tolerant I/O. - Available in 100 pin TQFP. - -40°C to 85°C Industrial Temperature Range. FEATURES RECEIVER: - On chip Clock and Data Recovery circuit for high input jitter tolerance. - Meets the jitter tolerance requirements as specified in ITU-T G.823_1993 for E3 and Telcordia GR-499CORE for DS3 applications. - Detects and...