Datasheet4U Logo Datasheet4U.com

XRT79L73 - 3-CHANNEL DS3/E3 ATM UNI/PPP COMBO IC

Features

  • On chip Clock and Data Recovery circuit for high input jitter tolerance.
  • Meets E3/DS3 Jitter Tolerance Requirements.
  • Detects and Clears LOS as per G.775.
  • Receiver Monitor mode handles up to 20 dB flat loss with 6 dB cable attenuation.
  • Compliant with jitter transfer template outlined in ITU G.751, G.752, G.755 and GR-499-CORE,1995 standards.
  • Meets ETSI TBR 24 and GR-499 Jitter Transfer Requirements.
  • On chip B3ZS/HDB3 encoder a.

📥 Download Datasheet

📁 Similar Datasheet

  • XRT71D03 - 3 CHANNEL E3/DS3/STS-1 JITTER ATTENUATOR (Exar)
  • XRT7296 - INTEGRATED LINE TRANSMITTER (Exar)
  • XRT72L13 - M13 MULTIPLEXER/CLEAR CHANNEL DS3 FRAMER IC (ETC)
  • XRT72L52 - TWO CHANNEL DS3/E3 FRAMER IC (Exar)
  • XRT72L54 - FOUR CHANNEL DS3/E3 FRAMER IC (Exar)
  • XRT72L56 - SIX CHANNEL DS3/E3 FRAMER IC (Exar)
  • XRT75R12 - Twelve Channel Line Interface (MaxLinear)
  • XRT5990 - Single Chip Pulse / Tone Dialer (Exar)
  • XRT81L27 - SEVEN CHANNEL E1 LINE INTERFACE UNIT (Exar)
  • XRT83VSH316 - 16-CHANNEL T1/E1/J1 SHORT-HAUL LINE INTERFACE UNIT (MaxLinear)
Other Datasheets by Exar Corporation
  • XRT79L71 - 1-CHANNEL DS3/E3 ATM UNI/PPP COMBO IC
  • XRT79L72 - 2-CHANNEL DS3/E3 ATM UNI/PPP COMBO IC
  • XRT79L74 - 4-CHANNEL DS3/E3 ATM UNI/PPP COMBO IC
  • XRT71D00 - E3/DS3/STS-1 JITTER ATTENUATOR/STS-1 TO DS3 DESYNCHRONIZER
  • XRT7250 - DS3/E3 FRAMER IC
  • XRT7288 - CEPT1 Line Interface
  • XRT7295AE - DS3/Sonet STS-1 Integrated Line Receiver
  • XRT7295AT - DS3/Sonet STS-1 Integrated Line Receiver

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com PRELIMINARY LINE INTERFACE U NIT XRT79L73 REV. P1.0.0 3 - CHANNEL DS3/E3 ATM UNI/PPP COMBO IC JUNE 2004 HARDWARE MANUAL The XRT79L73 is a three channel, ATM UNI/PPP Physical Layer Processor with integrated DS3/E3 framing controllers and Line Interface Units with Jitter Attenuators that are designed to support ATM direct mapping and cell delineation as well as PPP mapping and Frame processing. For ATM UNI applications, this device provides the ATM Physical Layer (Physical Medium Dependent and Transmission Convergence sub-layers) interface for the public and private networks at DS3/E3 rates. For Clear-Channel Framer applications, this device supports the transmission and reception of “user data” via the DS3/E3 payload.
Published: |