Datasheet4U Logo Datasheet4U.com

XRT83D10 - SINGLE CHANNEL DS1/CEPT LINE INTERFACE UNIT

General Description

The XRT83D10 is a fully integrated, single channel, Line Interface Unit (Transceiver) for 75 Ω or 120 Ω E1 (2.048 Mbps) and 100Ω DS1 (1.544 Mbps) applications.

Key Features

  • Complete E1 (CEPT) and DS1 Line Interface Unit.
  • Generates transmit output pulses that are compliant with the ITU-T G.703 Pulse Template for 2.048Mbps (E1) rates FIGURE 1. BLOCK.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
XRT83VSH316 16-CHANNEL T1/E1/J1 SHORT-HAUL LINE INTERFACE UNIT MaxLinear
XRT83VSH38 8-CHANNEL T1/E1/J1 SHORT-HAUL LINE INTERFACE UNIT MaxLinear
XRT81L27 SEVEN CHANNEL E1 LINE INTERFACE UNIT Exar
XRT85L61 BITS (BUILDING INTEGRATED TIMING SUPPLY) CLOCK EXTRACTOR Exar
XRT86VL30 T1/E1/J1 BITS ELEMENT - HARDWARE MANUAL Exar

Other Datasheets by Exar (now MaxLinear)

Part Number Description
XRT83L30 SINGLE-CHANNEL T1/E1/J1 LH/SH TRANSCEIVER
XRT83L314 14-CHANNEL T1/E1/J1 LONG-HAUL/SHORT-HAUL LINE INTERFACE UNIT
XRT83L34 QUAD T1/E1/J1 LH/SH TRANSCEIVER
XRT83L38 OCTAL T1/E1/J1 LH/SH TRANSCEIVER
XRT83SH314 14-CHANNEL T1/E1/J1 SHORT-HAUL LINE INTERFACE UNIT

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com xr JULY 2004 XRT83D10 SINGLE CHANNEL DS1/CEPT LINE INTERFACE UNIT REV. 1.0.3 GENERAL DESCRIPTION The XRT83D10 is a fully integrated, single channel, Line Interface Unit (Transceiver) for 75 Ω or 120 Ω E1 (2.048 Mbps) and 100Ω DS1 (1.544 Mbps) applications. The LIU consists of a receiver with adaptive data slicer for accurate data and clock recovery and a transmitter which accepts dual-rail digital inputs for signal transmission to the line using a low- impedance differential line driver. The LIU also includes a crystal-less jitter attenuator for clock and data smoothing which, depending on system requirements, can be selected in either the transmit or receive path.