Datasheet4U Logo Datasheet4U.com

XRT83L30 - SINGLE-CHANNEL T1/E1/J1 LH/SH TRANSCEIVER

General Description

The XRT83L30 is a fully integrated single-channel long-haul and short-haul line interface unit for T1(1.544Mbps) 100Ω, E1(2.048Mbps) 75Ω or 120Ω and J1 110Ω applications.

Key Features

  • as well as transmit driver short circuit detection and receive loss of signal monitoring. It supports internal impedance matching for 75Ω, 100Ω, 110Ω and 120Ω for both transmitter and receiver. For the receiver this is accomplished by internal resistors or through the combination of one single fixed value external resistor and programmable internal resistors. In the absence of the power supply, the transmit output and receive input are tri-stated allowing for redundancy.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
XRT83VSH316 16-CHANNEL T1/E1/J1 SHORT-HAUL LINE INTERFACE UNIT MaxLinear
XRT83VSH38 8-CHANNEL T1/E1/J1 SHORT-HAUL LINE INTERFACE UNIT MaxLinear
XRT81L27 SEVEN CHANNEL E1 LINE INTERFACE UNIT Exar
XRT85L61 BITS (BUILDING INTEGRATED TIMING SUPPLY) CLOCK EXTRACTOR Exar
XRT86VL30 T1/E1/J1 BITS ELEMENT - HARDWARE MANUAL Exar

Other Datasheets by Exar (now MaxLinear)

Part Number Description
XRT83L314 14-CHANNEL T1/E1/J1 LONG-HAUL/SHORT-HAUL LINE INTERFACE UNIT
XRT83L34 QUAD T1/E1/J1 LH/SH TRANSCEIVER
XRT83L38 OCTAL T1/E1/J1 LH/SH TRANSCEIVER
XRT83D10 SINGLE CHANNEL DS1/CEPT LINE INTERFACE UNIT
XRT83SH314 14-CHANNEL T1/E1/J1 SHORT-HAUL LINE INTERFACE UNIT

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com áç MAY 2003 PRELIMINARY XRT83L30 REV. P1.3.0 SINGLE-CHANNEL T1/E1/J1 LH/SH TRANSCEIVER WITH CLOCK RECOVERY AND JITTER ATTENUATOR GENERAL DESCRIPTION The XRT83L30 is a fully integrated single-channel long-haul and short-haul line interface unit for T1(1.544Mbps) 100Ω, E1(2.048Mbps) 75Ω or 120Ω and J1 110Ω applications. In long-haul applications the XRT83L30 accepts signals that have passed through cables from 0 feet to over 6000 feet in length and have been attenuated by 0 to 45dB at 772kHz in T1 mode or 0 to 43dB at 1024kHz in E1 mode. In T1 applications, the XRT83L30 can generate five transmit pulse shapes to meet the short-haul Digital Cross-Connect (DSX-1) template requirements as well as for Channel Service Units (CSU) Line Build Out (LBO) filters of 0dB, -7.