Datasheet4U Logo Datasheet4U.com

XRT83L38 - OCTAL T1/E1/J1 LH/SH TRANSCEIVER

General Description

The XRT83L38 is a fully integrated Octal (eight channel) long-haul and short-haul line interface unit for T1 (1.544Mbps) 100Ω, E1 (2.048Mbps) 75Ω or 120Ω, or J1 110Ω applications.

Key Features

  • as well as transmit driver short circuit detection and receive loss of signal monitoring. It supports internal impedance matching for 75Ω, 100Ω, 110Ω and 120Ω for both transmitter and receiver. In the absence of the power supply, the transmit outputs and receive inputs are tri-stated allowing for redundancy.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
XRT83VSH316 16-CHANNEL T1/E1/J1 SHORT-HAUL LINE INTERFACE UNIT MaxLinear
XRT83VSH38 8-CHANNEL T1/E1/J1 SHORT-HAUL LINE INTERFACE UNIT MaxLinear
XRT81L27 SEVEN CHANNEL E1 LINE INTERFACE UNIT Exar
XRT85L61 BITS (BUILDING INTEGRATED TIMING SUPPLY) CLOCK EXTRACTOR Exar
XRT86VL30 T1/E1/J1 BITS ELEMENT - HARDWARE MANUAL Exar

Other Datasheets by Exar (now MaxLinear)

Part Number Description
XRT83L30 SINGLE-CHANNEL T1/E1/J1 LH/SH TRANSCEIVER
XRT83L314 14-CHANNEL T1/E1/J1 LONG-HAUL/SHORT-HAUL LINE INTERFACE UNIT
XRT83L34 QUAD T1/E1/J1 LH/SH TRANSCEIVER
XRT83D10 SINGLE CHANNEL DS1/CEPT LINE INTERFACE UNIT
XRT83SH314 14-CHANNEL T1/E1/J1 SHORT-HAUL LINE INTERFACE UNIT

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com XRT83L38 REV. 1.0.0 OCTAL T1/E1/J1 LH/SH TRANSCEIVER WITH CLOCK RECOVERY AND JITTER ATTENUATOR JUNE 2004 GENERAL DESCRIPTION The XRT83L38 is a fully integrated Octal (eight channel) long-haul and short-haul line interface unit for T1 (1.544Mbps) 100Ω, E1 (2.048Mbps) 75Ω or 120Ω, or J1 110Ω applications. In long-haul applications the XRT83L38 accepts signals that have been attenuated from 0 to 36dB at 772kHz in T1 mode (equivalent of 0 to 6000 feet of cable loss) or 0 to 43dB at 1024kHz in E1 mode. In T1 applications, the XRT83L38 can generate five transmit pulse shapes to meet the short-haul Digital Cross-Connect (DSX-1) template requirements as well as for Channel Service Units (CSU) Line Build Out (LBO) filters of 0dB, -7.5dB -15dB and -22.