DM74LS251 Datasheet PDF (3-STATE 1-of-8 Line Data Selector/Multiplexer) | Download Fairchild Semiconductor DM74LS251

DM74LS251 - 3-STATE 1-of-8 Line Data Selector/Multiplexer

Datasheet Summary

Description

These data selectors/multiplexers contain full on-chip binary decoding to select one-of-eight data sources, and feature a strobe-controlled 3-STATE output.

The strobe must be at a low logic level to enable these devices.

The 3STATE outputs permit direct connection to a common bus.

Features

s 3-STATE version of DM74LS151 s Interface directly with system bus s Perform parallel-to-serial conversion s Permit multiplexing from N-lines to one line s Complementary outputs provide true and inverted data s Maximum number of common outputs: 129 s Typical propagation delay time (D to Y): 17 ns s Typical power dissipation: 35 mW Ordering Code: Order Number DM74LS251M DM74LS251N Package Number M16A N16E Package.

Datasheet Details

Part number	DM74LS251
Manufacturer	Fairchild Semiconductor
File Size	58.74 KB
Description	3-STATE 1-of-8 Line Data Selector/Multiplexer
Datasheet	DM74LS251 Datasheet
Additional preview pages of the DM74LS251 datasheet.

📁 Similar Datasheet

DM74LS251 - TRI-STATE Data Selectors/Multiplexers (National Semiconductor)

DM74LS253 - TRI-STATE Data Selectors/Multiplexers (National Semiconductor)

DM74LS256 - Dual 4-Bit Addressable Latch (National Semiconductor)

DM74LS257 - TRI-STATE Quad 2-Data Selectors/Multiplexers (National Semiconductor)

DM74LS257B - TRI-STATE Quad 2-Data Selectors/Multiplexers (National Semiconductor)

DM74LS258 - TRI-STATE Quad 2-Data Selectors/Multiplexers (National Semiconductor)

DM74LS258B - TRI-STATE Quad 2-Data Selectors/Multiplexers (National Semiconductor)

DM74LS259 - 8-Bit Addressable Latches (National Semiconductor)

DM74LS20 - Dual 4-Input NAND Gates (National Semiconductor)

DM74LS21 - Dual 4-Input AND Gates (National Semiconductor)

Full PDF Text Transcription

Click to expand full text

DM74LS251 3-STATE 1-of-8 Line Data Selector/Multiplexer August 1986 Revised March 2000 DM74LS251 3-STATE 1-of-8 Line Data Selector/Multiplexer General Description These data selectors/multiplexers contain full on-chip binary decoding to select one-of-eight data sources, and feature a strobe-controlled 3-STATE output. The strobe must be at a low logic level to enable these devices. The 3STATE outputs permit direct connection to a common bus. When the strobe input is HIGH, both outputs are in a highimpedance state in which both the upper and lower transistors of each totem-pole output are OFF, and the output neither drives nor loads the bus significantly. When the strobe is LOW, the outputs are activated and operate as standard TTL totem-pole outputs.

Published: Oct 9, 2005 |