Datasheet4U Logo Datasheet4U.com

AN2104 - Using Background Debug Mode

General Description

Enter background mode (if firmware enabled).

Read from memory with BDM in map (may steal cycles if external access) data for odd address on low byte, data for even address on high byte.

FF01, READ_BD_BYTE $FF01.

Key Features

  • d data 1 = Valid data.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AN2101 NTSC/PAL signal processor IC for 510H color CCD cameras Panasonic Semiconductor
AN2101FH NTSC/PAL signal processor IC for 510H color CCD cameras Panasonic Semiconductor
AN2108NFHQ Camera Signal Processing Panasonic Semiconductor
AN21 CMOS Gate Array AMI
AN2110S Video Camera Signal Processing Circuit ETC

Other Datasheets by Freescale Semiconductor (now NXP Semiconductors)

Part Number Description
AN2207 Using the MPMC8245 Card in Standalone Mode
AN2407 Reed Solomon Encoder/Decoder on the StarCore SC140/SC1400 Cores
AN2540 Synchronizing Instructions
AN2635 On-Chip FLASH Programming Routines
AN2701 PWM Generation

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com Freescale Semiconductor Order this document by AN2104/D AN2104 Using Background Debug Mode for the M68HC12 Family Freescale Semiconductor, Inc... By Timothy J. Airaudi Applications Engineering, Microcontroller Division Austin, Texas Introduction This application note describes the basic operation of the background debug mode (BDM) and some of its applications, as it relates to Motorola’s M68HC12 Family of microcontrollers (MCU). Examples of incircuit programming of internal FLASH memory and in-circuit debugging, using P&E Microcomputer Systems’ BDM interface cable and its software, are also contained in this document. The BDM’s main purpose is to allow debugging of the actual microcontroller being used in the user’s target application.