Datasheet4U Logo Datasheet4U.com

MBM29LV160BM - Flash Memory

General Description

The MBM29LV160TM/BM is a 32M-bit, 3.0 V-only Flash memory organized as 4M bytes by 8 bits or 2M words by 16 bits.

The MBM29LV160TM/BM is offered in 48-pin TSOP(1) and 48-ball FBGA.

The device is designed to be programmed in-system with the standard 3.0 V VCC supply.

Key Features

  • a sector erase architecture. The sector mode allows each sector to be erased and reprogrammed without affecting other sectors. All sectors are erased when shipped from the factory. The device features single 3.0 V power supply operation for both read and write functions. Internally generated and regulated voltages are provided for the program and erase operations. A low VCC detector automatically inhibits write operations on the loss of power. The end of program or erase is detected by Data Poll.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MBM29LV160B-12 16M (2M x 8/1M x 16) BIT FLASH MEMORY Fujitsu
MBM29LV160B-80 16M (2M x 8/1M x 16) BIT FLASH MEMORY Fujitsu
MBM29LV160B-90 16M (2M x 8/1M x 16) BIT FLASH MEMORY Fujitsu
MBM29LV160T-12 16M (2M x 8/1M x 16) BIT FLASH MEMORY Fujitsu
MBM29LV160T-80 16M (2M x 8/1M x 16) BIT FLASH MEMORY Fujitsu

Other Datasheets by Fujitsu Semiconductor Limited

Part Number Description
MBM29LV160B 16M (2M x 8/1M x 16) BIT FLASH MEMORY
MBM29LV160BE 16M (2M X 8/1M X 16) BIT
MBM29LV160T 16M (2M x 8/1M x 16) BIT
MBM29LV160TE 16M (2M X 8/1M X 16) BIT
MBM29LV160TM (MBM29LV160BM/TM) FLASH MEMORY CMOS 16 M (2M X 8/1M X 16) BIT MirrorFlashTM

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com FUJITSU SEMICONDUCTOR DATA SHEET DS05-20906-3E FLASH MEMORY CMOS 16 M (2M × 8/1M × 16) BIT MirrorFlashTM* MBM29LV160TM/BM 90 s DESCRIPTION The MBM29LV160TM/BM is a 32M-bit, 3.0 V-only Flash memory organized as 4M bytes by 8 bits or 2M words by 16 bits. The MBM29LV160TM/BM is offered in 48-pin TSOP(1) and 48-ball FBGA. The device is designed to be programmed in-system with the standard 3.0 V VCC supply. 12.0 V VPP and 5.0 V VCC are not required for program or erase operations. The devices can also be reprogrammed in standard EPROM programmers. The standard MBM29LV160TM/BM offers access times of 90 ns, allowing operation of high-speed microprocessors without wait states.