Fujitsu MBM29SL160TD
The MBM29SL160TD/BD are a 16M-bit, 1.8 V-only Flash memory organized as 2M bytes of 8 bits each or 1M words of 16 bits each. The MBM29SL160TD/BD are offered in a 48-pin TSOP(I) and 48-ball FBGA Package. These devices are designed to be programmed in-system with the standard system 1.8 V VCC supply.| Part No. | MBM29SL160TD |
|---|---|
| Datasheet | MBM29SL160TD Download |
| Manufacturer |  Fujitsu |
| Description | 16M (2M x 8/1M x 16) BIT |
| Buy | Stock & Price |
FEATURES
● Single 1.8 V read, program, and erase Minimizes system level power requirements● Compatible with JEDEC-standard commands Uses same software commands as E2PROMs
● Compatible with JEDEC-standard world-wide pinouts 48-pin TSOP(I) (Package suffix: PFTN – Normal Bend Type, PFTR – Reversed Bend Type) 48-ball FBGA (Package suffix: PBT)
● Minimum 100,000 program/erase cycles
● High performance 100 ns maximum access time
● Sector erase architecture Eight 4K word and thirty one 32K word sectors in word mode Eight 8K byte and thirty one 64K byte sectors in byte mode Any combination of sectors can be concurrently erased. Also supports full chip erase.
● Boot Code Sector Architecture T = Top sector B = Bottom sector
● One Time Protect (OTP) region 256 Byte of OTP , accessible through a new “OTP Enable” command sequence Factory serialized and protected to provide a secure electronic serial number (ESN)
● WP/ACC input pin At VIL, allows protection of boot sectors, regardless of sector pro...
