Datasheet4U Logo Datasheet4U.com

GSC34063 - DC TO DC CONVERTER CONTROLLER

General Description

The GSC34063 is a monolithic regulator subsystem, intended for use as DC to DC converter.

This device contains a temperature compensated band gap reference, a duty-cycle control oscillator, driver and high current output switch.

Key Features

  • Operation from 3.0V to 40V.
  • Short circuit current limiting.
  • Low standby current.
  • Output switch current of 1.5A without external transistors.
  • Frequency of operation from 100Hz to 100kHz.
  • Step-up, step-down or inverting switch regulators. Package Dimensions Pin Configuration & Block Diagram REF. A B C D E F Millimeter Min. Max. 5.80 6.20 4.80 5.00 3.80 4.00 0̓ 8̓ 0.40 0.90 0.19 0.25 REF. M H L J K G Millimeter Min. Max. 0.10 0.25 0.35 0.49 1.35.

📥 Download Datasheet

Datasheet Details

Part number GSC34063
Manufacturer GTM
File Size 295.83 KB
Description DC TO DC CONVERTER CONTROLLER
Datasheet download datasheet GSC34063 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
GSC301-10M0900 900MHz Band 10dB Chip Coupler Soshin
GSC302-20M0900 900MHz Band 20dB Chip Coupler Soshin
GSC303-30M0900 900MHz Band 30dB Chip Coupler Soshin
GSC310-10M1900 1900MHz Band 10dB Chip Coupler Soshin
GSC311-20M1900 1900MHz Band 20dB Chip Coupler Soshin

Other Datasheets by GTM

Part Number Description
GSC3842 HIGH PERFORMANCE CURRENT MODE CONTROLERS
GSC3843 HIGH PERFORMANCE CURRENT MODE CONTROLERS
GSC103 DUAL OP-AMP
GSC103A DUAL OPERATIONAL AMP AND VOLTAGE REFERENCE
GSC1118 1A Positive Low Dropout Fixed-mode Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com ISSUED DATE :2003/05/27 REVISED DATE :2005/08/10E GSC34063 DC TO DC CONVERTER CONTROLLER Description The GSC34063 is a monolithic regulator subsystem, intended for use as DC to DC converter. This device contains a temperature compensated band gap reference, a duty-cycle control oscillator, driver and high current output switch. It can be used for step down, step-up or inverting switching regulators as well as for series pass regulators. Features *Operation from 3.0V to 40V. *Short circuit current limiting. *Low standby current. *Output switch current of 1.5A without external transistors. *Frequency of operation from 100Hz to 100kHz. *Step-up, step-down or inverting switch regulators. Package Dimensions Pin Configuration & Block Diagram REF.