ECN3022 Datasheet | Hitachi Semiconductor

Features ∗ Speed control for a 3-phase DC brushless motor is available with an external microprocessor. ∗ Bottom arm circuits can be operated in 20k Hz chopping frequency of PWM. ∗ For converted AC200 to 230V power supplies. D2 VCC(15V) C0 CB HU VB VB supply Clock HV HW C+ RV RW D1 + C1 CL VS1 VS2 C2 + C- Charge Pump FG FG DM Rotating Directio M Top Arm Driver 3-Phase Distributor Bottom Arm Driver LVSD Clock Hall ICs MU MV MW Microprocessor Analog output VSP parator CMP + 1.23V + CMP - Motor SAW wave Generator Over Current Sense + Vref 0.5V RS GH1 GH2 CR RTR CTR Fig. 1 Block diagram .. PDE-3022-1 .. .. P2/9 1. General (1) Type (2) Application (3) Structure (4) Package ECN3022SP, ECN3022SPV, ECN3022SPR 3-phase DC Brushless Motor Monolithic IC SP-23TA, SP-23TB, SP-23TR 2. Maximum Allowable Ratings (Ta=25°C) No. Items Symbols 1 Output Device VSM Breakdown Voltage 2 Supply Voltage VCC 3 Input Voltage VIN 4 5 Output Current IOM 1.5 A Note 1 Note 2 Operating Junction Tjop °C -20 ~ +135 Temperature 6 Storage Temperature Tstg °C -40 ~ +150 Note 1. Remended Safe Operating Area(SOA) It is remended that this IC should be used within the SOA as shown below, where IM and VM are the current and the voltage at the terminals connected to motor coils when the IGBT turn on and turn off. Terminal VS1,VS2 MU,MV,MW VCC VSP,RS HU,HV,HW MU,MV,MW Ratings 500 18 -0.5 ~ VB+0.5 Unit V V...