Download the iC-MB4 datasheet PDF.
This datasheet also covers the iC-MB4-IC variant, as both devices belong to the same biss interface master family and are provided as variant models within a single manufacturer datasheet.
General Description
iC-MB4 is a single-chip BiSS/SSI interface master controller featuring an 8-bit bus interface to industrial standard microcontroller.
Alternatively an SPI interface enables serial communication between iC-MB4 and the connected microcontroller.
Key Features
Bidirectional BiSS communication with up to 8 slaves.
Supports SSI protocol for unidirectional data transmission.
Synchronous sensor data acquisition with cyclic transfer at data
rates of up to 10 Mbit/s.
Configurable interface with TTL, CMOS, RS422 or LVDS.
Slave register operations during cyclic data transfers.
Automatic compensation of line delays and conversion times.
Data lengths of up to 64 bit for sensor data,
configurable fo.
Full PDF Text Transcription for iC-MB4 (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
iC-MB4. For precise diagrams, and layout, please refer to the original PDF.
iC-MB4 BiSS INTERFACE MASTER preliminary Rev C1, Page 1/42 FEATURES • Bidirectional BiSS communication with up to 8 slaves • Supports SSI protocol for unidirectional data...
View more extracted text
on with up to 8 slaves • Supports SSI protocol for unidirectional data transmission • Synchronous sensor data acquisition with cyclic transfer at data rates of up to 10 Mbit/s • Configurable interface with TTL, CMOS, RS422 or LVDS • Slave register operations during cyclic data transfers • Automatic compensation of line delays and conversion times • Data lengths of up to 64 bit for sensor data, configurable for each slave • Data verification by CRC polynomials of up to 16 bits per slave • Separate memory banks enable free controller access during BiSS sensor data transfers • 64 bytes memory for bidirectional register commun
iC-MB4 Datasheet
