IP113MLF Datasheet | IPc

.. IP113M LF Preliminary Data Sheet Managed 10/100Base-TX / FX Media Converter Features A 10/100BASE-TX/ 100BASE-FX converter with a SMI port for management Built in a 10/100BASE-TX transceiver Built in a PHY for 100BASE-FX Built in a 2-port switch - Pass all packets without address and CRC check (optional) - Supports modified cut-through frame forwarding for low latency - Supports pure converter mode data forwarding for extreme low latency - Supports flow control for full and half duplex operation - Bandwidth control - Max packet length 1600 bytes - Optional forward fragments Built in 128Kb RAM for data buffer Supports 3.3v I/O tolerance SMI (MDC, MDIO) and MII registers for management - Configure local and remote IP113M LF through local SMI - Monitor local and remote IP113M LF through local SMI - Configure/ monitor TP port support (auto-negotiation or force 10M/100M, full/half) - Configure/ monitor flow control, bandwidth - Supports loop back test (In-band or out-band, auto or program) - The maintenance frame is pliant to TS-1000 standard (the Telemunication Technology mittee, TTC) Supports Statistic Counters Supports auto MDI-MDIX function Supports link fault pass through function Supports far end fault function LED display for link/activity, full/half, 10/100 Built in a watchdog timer to monitor internal switch error Supports EEPROM Configuration 0.25u CMOS technology Single 2.5V power supply 48-pin LQFP package Support Lead Free package (Please refer to the Order Information) General Description IP113M LF can be a 10/100BASE-TX to 100BASE-FX converter with an SMI port for management. It consists of a 2-port switch controller, a fast Ethernet transceiver and a PHY for 100BASE-FX. The transceivers in IP113M LF are designed in DSP approach with advance 0.25um technology; this results in high noise immunity and robust performance. IP113M LF not only supports store and forward mode, it also supports modified cut through mode and pure...