M660 Datasheet PDF - Integrated Circuit Systems DUAL SAW / SELECTABLE FREQUENCY VCSO Specs

M660 - DUAL SAW / SELECTABLE FREQUENCY VCSO

Datasheet Summary

Description

The M660-01 is a dual SAW, selectable frequency VCSO for low-jitter clock generation.

An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator) function, which results in low output phase noise and very low jitter.

Features

M660-01 output frequencies from 125 to 175 MHz.
M660-02 output frequencies from 500 to 700 MHz (Specify center frequency at time of order) Two integrated SAW devices Selectable output frequency Supports multi-rate optical interface requirements Low phase jitter 0.37ps rms typical (12kHz to 20MHz) Low phase noise -70dBc/Hz @ 1kHz offset Differential 3.3V LVPECL output Single 3.3V power supply Small 9 x 14 mm.

Datasheet Details

Part number	M660
Manufacturer	Integrated Circuit Systems
File Size	59.33 KB
Description	DUAL SAW / SELECTABLE FREQUENCY VCSO
Datasheet	M660 Datasheet
Additional preview pages of the M660 datasheet.

📁 Similar Datasheet

M66004FP - null16-DIGIT 5x7-SEGMENT VFD CONTROLLER (Mitsubishi)

M66004M6FP200D - C-MOS 7 Segments Fluorescent Display Controller (ETC)

M66004SP - null16-DIGIT 5x7-SEGMENT VFD CONTROLLER (Mitsubishi)

M66006FP - 12-BIT I/O EXPANDER (Mitsubishi)

M66006P - 12-BIT I/O EXPANDER (Mitsubishi)

M66007FP - 12-BIT INPUT EXPANDER (Mitsubishi)

M66007P - 12-BIT INPUT EXPANDER (Mitsubishi)

M66008FP - 16-BIT I/O EXPANDER (Mitsubishi)

M66008P - 16-BIT I/O EXPANDER (Mitsubishi)

M66009FP - 8-BIT I/O EXPANDER WITH 5-BIT ADDRESS (Mitsubishi)

Full PDF Text Transcription

Click to expand full text

Integrated Circuit Systems, Inc. Product Brief M660 DUAL SAW, SELECTABLE FREQUENCY VCSO PIN ASSIGNMENT (9 x 14 mm SMT) nFOUT 5 FOUT 4 3 GND VCC 6 1 VIN GENERAL DESCRIPTION The M660-01 is a dual SAW, selectable frequency VCSO for low-jitter clock generation. An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator) function, which results in low output phase noise and very low jitter. The M660-01 is available in a range of center frequencies from 125 to 175MHz. The M660-02 is available in a range of center frequencies from 500 to 700MHz. Minimum pull-range is +50 ppm (wider pull-range is available).

Published: Apr 26, 2005 |