Datasheet4U Logo Datasheet4U.com

ACS132MS - Radiation Hardened Quad 2-Input NAND Schmitt Trigger

General Description

only.

Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice.

Accordingly, the reader is cautioned to verify that data sheets are current before placing orders.

Key Features

  • QML Qualified Per MIL-PRF-38535 Requirements.
  • 1.25 Micron Radiation Hardened SOS CMOS.
  • Radiation Environment - Latch-Up Free Under any Conditions - Total Dose.
  • . . 3 x 105 RAD (Si) - SEU Immunity.
  • . . 100MeV/(mg/cm2).
  • Input Logic Levels . . . . VIL = (0.3)(VCC), VIH = (0.7)(VCC).
  • Hysteresis Voltage.
  • 4.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ACS101A Acapella Optical Modem Semtech Corporation
ACS102-5T1 AC LINE SWITCH STMicroelectronics
ACS102-5TA AC LINE SWITCH STMicroelectronics
ACS102-6T Transient protected AC switch STMicroelectronics
ACS102A ACS102A Fiber Modem Semtech Corporation

Other Datasheets by Intersil (now Renesas)

Part Number Description
ACS138MS Radiation Hardened 3-to-8 Line Decoder/Demultiplexer
ACS139MS Radiation Hardened Dual 2-to-4 Line Decoder/Demultiplexer
ACS109MS Radiation Hardened Dual J-K Flip-Flop
ACS10MS Radiation Hardened Triple Three-Input NAND Gate
ACS112MS Radiation Hardened Dual J-K Flip-Flop

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ACS132MS Data Sheet November 1998 File Number 4546 Radiation Hardened Quad 2-Input NAND Schmitt Trigger The Radiation Hardened ACS132MS is a Quad 3-Input NAND Gate with Schmitt Trigger inputs. When any input to one of the gates is at a LOW level, the corresponding Y output will be HIGH. A HIGH level on both inputs will cause the output for that gate to be LOW. The Schmitt Trigger input stage provides 400mV (Min) of hysteresis and permits input signals with longer rise times. All inputs are buffered and the outputs are designed for balanced propagation delay and transition times. The ACS132MS is fabricated on a CMOS Silicon on Sapphire (SOS) process, which provides an immunity to Single Event Latch-up and the capability of highly reliable performance in any radiation environment.