Datasheet4U Logo Datasheet4U.com

ICM-20600 - High Performance 6-Axis MEMS MotionTracking

General Description

The ICM-20600 is a 6-axis MotionTracking device that combines a 3-axis gyroscope, 3-axis accelerometer, in a small 2.5 mm x 3 mm x 0.91 mm (14-pin LGA) package.

High performance specs o Gyroscope sensitivity error: ±1% o Gyroscope noise: ±4 mdps/Hz o Accelerometer noise: 100 µg/Hz Inc

Key Features

  • an operating voltage range down to 1.71V. Communication ports include I2C and high speed SPI at 10 MHz.

📥 Download Datasheet

Datasheet Details

Part number ICM-20600
Manufacturer InvenSense
File Size 1.84 MB
Description High Performance 6-Axis MEMS MotionTracking
Datasheet download datasheet ICM-20600 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ICM-20602 High Performance 6-Axis MEMS MotionTracking TDK
ICM-20648 6-Axis MEMS MotionTracking Device TDK
ICM-20689 High Performance 6-Axis MEMS MotionTracking Device TDK
ICM-20789 High Performance Integrated 6-Axis Inertial and Barometric Pressure Sensor TDK
ICM-2824 High-Current Choke Vishay

Other Datasheets by InvenSense

Part Number Description
ICM-20601 Wide-Range 6-Axis MotionTracking
ICM-20602 High Performance 6-Axis MEMS MotionTracking
ICM-20608 A 6-axis MotionTracking device that combines a 3-axis gyroscope and a 3-axis accelerometer
ICM-20608-G A 6-axis MotionTracking device that combines a 3-axis gyroscope and a 3-axis accelerometer
ICM-20648 MotionTracking device

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ICM-20600 High Performance 6-Axis MEMS MotionTracking™ Device in 2.5x3x0.91mm Package GENERAL DESCRIPTION The ICM-20600 is a 6-axis MotionTracking device that combines a 3-axis gyroscope, 3-axis accelerometer, in a small 2.5 mm x 3 mm x 0.91 mm (14-pin LGA) package.  High performance specs o Gyroscope sensitivity error: ±1% o Gyroscope noise: ±4 mdps/Hz o Accelerometer noise: 100 µg/Hz  Includes 1 KB FIFO to reduce traffic on the serial bus interface, and reduce power consumption by allowing the system processor to burst read sensor data and then go into a low-power mode  EIS FSYNC support ICM-20600 includes on-chip 16-bit ADCs, programmable digital filters, an embedded temperature sensor, and programmable interrupts. The device features an operating voltage range down to 1.71V.