SMD2016 Datasheet | Littelfuse

Features These devices offer a wide range of hold currents from 0.3 A to 2.0 A and voltages form 6 V to 60 V. The SMD2016 product line is suitable for high density circuit board applications in puters, telemunications and general electronics. Suitable for relow soldering. .. Solder pad Layout (mm) Dimensions (mm) Max. Device Surface Temperature in Tripped State 125 °C Operating / Storage Temperature -40 ºC to +85 ºC (consider derating) Humidity Ageing +85 °C, 85 % R.H., 1000 hours, ± 5 % typical resistance change Vibration MIL-STD-883C, Method 2007.1, Condition A, no change Thermal Shock MIL-STD-202F, Method 107G +85 °C to -40 °C 20 times, -30 % typical resistance change Solderability Meets EIA Specification RS186-9E, ANSI/J-STD-002, Category 3 Reflow only Solvent Resistance MIL-STD-202, Method 215, no change Marking “P”, Part Code Dimensions (mm) Model SMD2016P030TF SMD2016P050TF SMD2016P100TF SMD2016P100TF/33 SMD2016P150TF SMD2016P200TF A Min Max 4.72 4.72 4.72 4.72 4.72 4.72 5.44 5.44 5.44 5.44 5.44 5.44 B Min Max 3.70 3.70 3.70 3.70 3.70 3.70 4.43 4.43 4.43 4.43 4.43 4.43 C Min Max 0.75 1.20 0.50 0.75 0.75 0.50 1.25 2.00 0.75 1.25 1.55 0.75 D Min 0.30 0.30 0.30 0.30 0.30 0.30 E Min Max 0.25 0.25 0.25 0.25 0.25 0.25 0.65 0.65 0.65 0.65 0.65 0.65 packaging quantity tape 1,500 1,500 2,000 1,500 1,500 2,000 Permissible continuous operating current is ≤ 100 % at ambient temperature of 20 ºC (68 ºF). Model c URus - - - - - - SMD2016P030TF SMD2016P050TF SMD2016P100TF SMD2016P100TF/33 SMD2016P150TF SMD2016P200TF NOTE: I hold = I trip = Vmax = I max = 0.30 0.55 1.10 1.10 1.50 2.00 0.60 1.10 2.20 2.20 3.00 4.20 60 60 15 33 15 6 20 20 40 40 40 40 3.00 @ 1.50 5.00 @ 2.50 0.50 @ 8.00 0.50 @ 8.00 1.00 @ 8.00 3.00 @ 8.00 1.4 1.4 1.4 1.4 1.4 1.4 0.500 0.200 0.100 0.100 0.070 0.048 1.400 0.700 0.250 0.250 0.130 0.070 2.300 1.000 0.400 0.400 0.180 0.100 Hold current: maximum current device will pass without tripping in 20 °C still air. Trip...