N25Q032A Datasheet | Micron Technology

32Mb, 3V, Multiple I/O Serial Flash Memory Features Micron Serial NOR Flash Memory 3V, Multiple I/O, 4KB Sector Erase N25Q032A Features - - - - - - SPI-patible serial bus interface 108 MHz (MAX) clock frequency 2.7- 3.6V single supply voltage Dual/quad I/O instruction provides increased throughput up to 432 MHz Supported protocols - Extended SPI, dual I/O, and quad I/O Execute-in-place (XIP) mode for all three protocols - Configurable via volatile or nonvolatile registers - Enables memory to work in XIP mode directly after power-on PROGRAM/ERASE SUSPEND operations Continuous read of entire memory via a single mand - FAST READ - QUAD or DUAL OUTPUT FAST READ - QUAD or DUAL I/O FAST READ Flexible to fit application - Configurable number of dummy cycles - Configurable output buffer - RESET function available upon customer request 64-byte, user-lockable, one-time programmable (OTP) dedicated area Erase capability - Subsector erase 4KB uniform granularity blocks - Sector erase 64KB uniform granularity blocks - Full-chip erase - Write protection - Software write protection applicable to every 64KB sector via volatile lock bit - Hardware write protection: protected area size defined by four nonvolatile bits (BP0, BP1, BP2, and TB) - Additional smart protections, available upon request - Electronic signature - JEDEC-standard, 2-byte signature (BA16h) - Unique ID code: 17 read-only bytes, including: - Two additional extended device ID bytes to identify device factory options - Customized factory data (14 bytes) - Minimum 100,000 ERASE cycles per sector - More than 20 years data retention - Packages (JEDEC-standard, Ro HS...