Monolithic Power Systems MP2886A
The MP2886A is a digital, multi-phase, pulsewidth modulation (PWM) controller with a digital PWM-VID interface that is compatible with NVIDIA’s Open VReg specification. The MP2886A works with MPS’ Intelli-Phase products to complete the multi-phase voltage regulator (VR) solution with minimal external components. The MP2886A can be configured with up to 6-phase operation.| Part No. | MP2886A |
|---|---|
| Datasheet | MP2886A Download |
| Manufacturer |  Monolithic Power Systems |
| Description | Multi-Phase PWM Controller |
| Buy | Stock & Price |
DESCRIPTION
The MP2886A provides an on-chip EEPROM to store and restore device configurations. Device configurations and fault parameters can be easily programmed or monitored via the PMBus/I2C interface. The MP2886A can monitor and report the output current through the CS output from the Intelli-Phase products. The MP2886A is based on a unique, digital, multi-phase, non-linear control and provides fast transient response to the load transient with minimal output capacitors. With only one powerloop control method for both steady state and load transient, the power loop compensation is very easy to configure. The MP2886A is available in a QFN-40 (5mmx5mm) package. MP2886A Digital, Multi-Phase PWM Controller with PMBus and PWM-VIDFEATURES
● Programmable Multi-Phase up to 6 Phases● PWM-VID Interface Compatible with NVIDIA
● PMBus/I2C Compliant (1MHz Bus Speed)
● Pin Programmable for PMBus Address
● Built-In EEPROM to Store Custom Configurations
● Switching Frequency Range 200kHz to 5MHz...
