29F800 Datasheet | Macronix

FEATURES - 1,048,576 x 8/524,288 x 16 switchable - Single power supply operation - 5.0V only operation for read, erase and program operation - Fast access time: 70/90/120ns - Low power consumption - 50m A maximum active current - 0.2u A typical standby current - mand register architecture - Byte/word Programming (7us/12us typical) - Sector Erase (Sector structure 16K-Bytex1, 8K-Bytex2, 32K-Bytex1, and 64K-Byte x15) - Auto Erase (chip & sector) and Auto Program - Automatically erase any bination of sectors with Erase Suspend capability. - Automatically program and verify data at specified address - Erase suspend/Erase Resume - Suspends sector erase operation to read data from, or program data to, another sector that is not being erased, then resumes the erase. - Status Reply - Data polling & Toggle bit for detection of program and erase operation pletion. - Ready/Busy pin (RY/BY) - Provides a hardware method of detecting program or erase operation pletion. - Sector protection - Sector protect/chip unprotect for 5V/12V system. - Hardware method to disable any bination of sectors from program or erase operations - Tempory sector unprotect allows code changes in previously locked sectors. - 100,000 minimum erase/program cycles - Latch-up protected to 100m A from -1V to VCC+1V - Boot Code Sector Architecture - T = Top Boot Sector - B = Bottom Boot Sector - Low VCC write inhibit is equal to or less than 3.2V - Package type: - 44-pin SOP - 48-pin TSOP - patibility with JEDEC standard - Pinout and software patible with single-power supply Flash GENERAL DESCRIPTION The MX29F800T/B is a 8-mega bit Flash memory organized as 1M bytes of 8 bits or 512K words of 16 bits. MXIC's Flash memories offer the most cost-effective and reliable read/write non-volatile random access memory. The MX29F800T/B is packaged in 44-pin SOP, 48-pin TSOP. It is designed to be reprogrammed and erased in system or in standard EPROM programmers. The standard MX29F800T/B offers access time as fast as...