Datasheet4U Logo Datasheet4U.com

29F800 - 8 Mbit 1Mb x8 or 512Kb x16 / Boot Block Single Supply Flash Memory

General Description

The M29F800A is an 8 Mbit (1Mb x8 or 512Kb x16) non-volatile memory that can be read, erased and reprogrammed.

These operations can be performed using a single 5V supply.

On power-up the memory defaults to its Read mode where it can be read in the same way as a ROM or EPROM.

Key Features

  • s from several memories to be connected to a single pull-up resistor. A Low will then indicate that one, or more, of the memories is busy. By.

📥 Download Datasheet

Datasheet Details

Part number 29F800
Manufacturer STMicroelectronics
File Size 142.66 KB
Description 8 Mbit 1Mb x8 or 512Kb x16 / Boot Block Single Supply Flash Memory
Datasheet download datasheet 29F800 Datasheet

Full PDF Text Transcription for 29F800 (Reference)

Note: Below is a high-fidelity text extraction (approx. 800 characters) for 29F800. For precise diagrams, and layout, please refer to the original PDF.

M29F800AT M29F800AB 8 Mbit (1Mb x8 or 512Kb x16, Boot Block) Single Supply Flash Memory PRELIMINARY DATA s SINGLE 5V±10% SUPPLY VOLTAGE for PROGRAM, ERASE and READ OPERAT...

View more extracted text
DATA s SINGLE 5V±10% SUPPLY VOLTAGE for PROGRAM, ERASE and READ OPERATIONS ACCESS TIME: 70ns PROGRAMMING TIME – 8µs per Byte/Word typical 19 MEMORY BLOCKS – 1 Boot Block (Top or Bottom Location) – 2 Parameter and 16 Main Blocks 1 44 s s s s PROGRAM/ERASE CONTROLLER – Embedded Byte/Word Program algorithm – Embedded Multi-Block/Chip Erase algorithm – Status Register Polling and Toggle Bits – Ready/Busy Output Pin TSOP48 (N) 12 x 20mm SO44 (M) s ERASE SUSPEND and RESUME MODES – Read and Program another Block during Erase Suspend Figure 1.