Datasheet4U Logo Datasheet4U.com

MAX3341E - +-15kV ESD-Protected USB Level Translator in UCSP with USB Detect

General Description

The MAX3341E USB level translator converts logic-level signals to USB signals, and USB signals to logic-level signals.

An internal 1.5kΩ USB termination resistor supports full-speed (12Mbps) USB operation.

Key Features

  • ±15kV ESD Protection On D+ and DComplies with USB Standard 1.1 (Full Speed 2.0) USB Skew Independent of Input Skew Separate VP and VM Inputs/Outputs VL Down to 1.8V Allows Connection with LowVoltage ASICs Reenumerate with Power Applied USB Detect Function Allows Single-Ended or Differential Logic I/O Internal Linear Regulator Allows Direct Powering from the USB Internal Termination Resistor for Full-Speed Operation Three-State Outputs No Power-Supply Sequencing Required Driver Active in Suspend.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX334 High Speed Quad SPST Analog Switch Maxim
MAX331 460kbps / 1A Supply Current / RS-232-Compatible Transceivers Maxim
MAX3311 460kbps / 1A Supply Current / RS-232-Compatible Transceivers Maxim
MAX3311E RS-232-Compatible Transceivers Maxim
MAX3313 460kbps / 1A Supply Current / RS-232-Compatible Transceivers Maxim

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX3344E +-5kV ESD-Protected USB Transceivers
MAX3345E +-5kV ESD-Protected USB Transceivers
MAX3346E +-15kV ESD-Protected USB Transceiver
MAX3349E USB 2.0 Full Speed TRansceiver
MAX3349EA USB 2.0 Full Speed TRansceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-2321; Rev 0; 4/02 www.DataSheet4U.com ±15kV ESD-Protected USB Level Translator in UCSP with USB Detect General Description The MAX3341E USB level translator converts logic-level signals to USB signals, and USB signals to logic-level signals. An internal 1.5kΩ USB termination resistor supports full-speed (12Mbps) USB operation. The MAX3341E provides built-in ±15kV ESD-protection circuitry on the USB I/O pins, D+ and D-, and VCC. The MAX3341E operates with logic supply voltages as low as 1.8V, ensuring compatibility with low-voltage ASICs. The suspend mode lowers supply current to less than 50µA. A unique enumerate feature allows changes in USB communication protocol while power is applied. The MAX3341E is fully compliant with USB specification 1.