MAX3349EA Description
The MAX3349EA ±15kV ESD-protected, USB transceiver provides a full-speed USB interface to a lower voltage microprocessor or ASIC. The device supports enumeration, suspend, and VBUS detection. A special UART multiplexing mode routes external UART signals (Rx and Tx) to D+ and D-, allowing the use of a shared connector to reduce cost and part count for mobile devices.
MAX3349EA Key Features
- ±15kV ESD HBM Protection on D+ and D- UART Mode Routes External UART Signals to D+/D- Internal Linear Regulator Allows D
- Separate Voltage Input for UART Transmitter/Receiver (VUART)
- Internal 1.5kΩ Pullup Resistor on D+ Controlled by Enumerate Input
- Internal Series Termination Resistors on D+ and D- plies with USB Specification Revision 2.0, Full-Speed 12Mbps Operatio
- Built-In Level Shifting Down to +1.4V, Ensuring patibility with Low-Voltage ASICs
- VBUS Detection
- bined VP and VM Inputs/Outputs
- No Power-Supply Sequencing Required
- Available in 16-Bump UCSP (2mm x 2mm) Package