Datasheet4U Logo Datasheet4U.com

MAX1729 - ECB and LCD Display Bias Supply with Accurate Output Voltage and Temperature Compensation

General Description

The MAX1729 micropower step-up/step-down DC-DC converter is ideally suited for electrically controlled birefringence (ECB) and liquid-crystal-display (LCD) biassupply generation.

Key Features

  • low quiescent current (67µA typical). A logic-controlled shutdown mode further reduces quiescent current to 0.4µA typical. The MAX1729 features an input that dynamically adjusts the output voltage to control display color or contrast. It offers two feedback modes: internal and external. Internal feedback mode allows output voltages between 2.5V and 16V, and is specifically designed to hold temperature drift to ±11ppm/°C. External feedback mode allows the MAX1729 output voltage range to be tailor.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX17290 PWM Boost Controller Maxim Integrated
MAX17292 PWM Boost Controller Maxim Integrated
MAX1720 Switched-Capacitor Voltage Inverters Maxim Integrated
MAX1720 Switched Capacitor Voltage Inverter ON Semiconductor
MAX17201 Stand-Alone ModelGauge m5 Fuel Gauge Maxim Integrated

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX172 Complete 10s CMOS 12-Bit ADC
MAX1722 Step-Up DC-DC Converters
MAX1723 Step-Up DC-DC Converters
MAX1724 Step-Up DC-DC Converters
MAX1725 12V / Ultra-Low IQ / Low-Dropout Linear Regulators

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-1406; Rev 1; 1/99 KIT ATION EVALU SHEET A T A WS D FOLLO ECB and LCD Display Bias Supply with Accurate Output Voltage and Temperature Compensation General Description The MAX1729 micropower step-up/step-down DC-DC converter is ideally suited for electrically controlled birefringence (ECB) and liquid-crystal-display (LCD) biassupply generation. It provides step-up/step-down voltage conversion and reduces output ripple by using a step-up DC-DC converter followed by a linear regulator. This architecture permits a physically smaller inductor than those used in competing SEPIC and flyback topologies. This device features low quiescent current (67µA typical). A logic-controlled shutdown mode further reduces quiescent current to 0.4µA typical.