Datasheet4U Logo Datasheet4U.com

MAX355 - Fault-Protected Analog Multiplexers

General Description

The MAX354/MAX355 fault-protected multiplexers (muxes) use a series N-channel, P-channel, N-channel structure that protects the devices from overvoltage up to 40V beyond the supply rails during power-up, powerdown, and fault conditions.

Key Features

  • o 350Ω Max On-Resistance o Improved 2nd Source for MAX358/MAX359 and DG458/DG459 o Pin Compatible with ADG508F/ADG509F o All Switches Off with Supplies Off o On Switch Turns Off with Overvoltage o Output Clamps at 1.5V Below Supply Rails o 0.5nA Max Input Leakage at +25°C (5nA at +85°C) o No Power-Up Sequencing Required o TTL and CMOS-Logic Compatibility MAX354/MAX355 ______________Ordering Information PART MAX354CPE MAX354CWE MAX354C/D MAX354EPE MAX354EWE MAX354MJE MAX355CPE MAX355CWE MAX355C.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX35101 Time-to-Digital Converter Maxim Integrated
MAX3516 Upstream CATV Amplifiers Maxim Integrated
MAX3517 Upstream CATV Amplifiers Maxim Integrated
MAX3523 Low-Power DOCSIS 3.1 Programmable-Gain Amplifier Maxim Integrated
MAX3537 (MAX3537 / MAX3538) Broadband Variable Gain Amplifiers Maxim Integrated Products

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX3558 Quad-Output LNA
MAX350 Serially Controlled / Low-Voltage / 8-Channel/Dual 4-Channel Multiplexers
MAX3507 Upstream CATV Amplifier with On-Chip Anti-Alias Filter
MAX3509 Upstream CATV Amplifier
MAX351 Precision / Quad / SPST Analog Switches

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-0389; Rev. 2; 9/96 Fault-Protected Analog Multiplexers _______________General Description The MAX354/MAX355 fault-protected multiplexers (muxes) use a series N-channel, P-channel, N-channel structure that protects the devices from overvoltage up to 40V beyond the supply rails during power-up, powerdown, and fault conditions. The MAX354/MAX355 also protect sensitive circuit components against voltages near or beyond the normal supplies. The MAX354 single 8-channel mux and the MAX355 dual 4-channel mux protect analog signals while operating from a single 4.5V to 36V supply or ±4.5V to ±18V dual supplies. These muxes have 350Ω on-resistance and can be used for demultiplexing as well as multiplexing. Input leakage current is less than 0.5nA at +25°C and less than 5nA at +85°C.