Datasheet4U Logo Datasheet4U.com

MAX5100 - +2.7V to +5.5V / Low-Power / Quad / Parallel 8-Bit DAC with Rail-to-Rail Voltage Outputs

General Description

The MAX5100 parallel-input, voltage-output, quad 8-bit digital-to-analog converter (DAC) operates from a single +2.7V to +5.5V supply and comes in a space-saving 20-pin TSSOP package.

Key Features

  • a shutdown mode that reduces current to 1nA, as well as a power-on reset mode that resets all registers to code 00 hex on power-up. o Ultra-Low Supply Current 0.4mA while Operating 1nA in Shutdown Mode o Ultra-Small 20-Pin TSSOP Package o Ground to VDD Reference Input Range o Output Buffer Amplifiers Swing Rail-to-Rail o Double-Buffered Registers for Synchronous Updating o Power-On Reset Sets All Registers to Zero Features o +2.7V to +5.5V Single-Supply Operation MAX5100 Ordering Information.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX5109 8-Bit DACs Maxim Integrated Products
MAX5113 14-Bit Current DAC Maxim Integrated
MAX5121 Serial Voltage-Output DACs Maxim Integrated
MAX5123 Force/Sense DACs Maxim Integrated
MAX5128 Linear-Taper Digital Potentiometer Maxim Integrated Products

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX510 Quad / Serial 8-Bit DACs
MAX5101 +2.7V to +5.5V / Low-Power / Triple / Parallel 8-Bit DAC
MAX5102 +2.7V to +5.5V / Low-Power / Dual / Parallel 8-Bit DAC with Rail-to-Rail Voltage Outputs
MAX5104 Low-Power / Dual / Voltage-Output / 12-Bit DAC with Serial Interface
MAX5105 Nonvolatile / Quad / 8-Bit DACs

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-1557; Rev 0; 10/99 +2.7V to +5.5V, Low-Power, Quad, Parallel 8-Bit DAC with Rail-to-Rail Voltage Outputs General Description The MAX5100 parallel-input, voltage-output, quad 8-bit digital-to-analog converter (DAC) operates from a single +2.7V to +5.5V supply and comes in a space-saving 20-pin TSSOP package. Internal precision buffers swing Rail-to-Rail ® , and the reference input range includes both ground and the positive rail. All four DACs share a common reference input. The MAX5100 provides double-buffered logic inputs: four 8-bit buffer registers followed by four 8-bit DAC registers. This keeps the DAC outputs from changing during the write operation. An asynchronous control pin, LDAC , allows for simultaneous updating of the DAC registers.